I wish i could be there and fixing bikes together buddy!!! Anyway. I lower the mask 5 degrees. I think it's even better this way.PIMPMYFZR wrote:looks beautiful man .. i wish you were closer to Detroit ... you'd be my new best friend man ...
the body is coming along great and i love the wheels color .. thats my next mod for my R1 newer R1 wheels powdercoated anodized gold color ..
Just fix a 750 FZR
Moderators: Site Director, FZR Forum Moderators
Re: Just bought a 750 FZR
THE COST OF YOUR HELMET, IT DEPENTS ON HOW MUCH EXPENSIVE YOU THINK YOUR HEAD IS.
Re: Just bought a 750 FZR
Looking good
92 FZR600
Yoshimura RS-3 Carbon Fiber Slip-on
02 R6 Caliper and MC Swap with S/S Lines
Dual Headlight Upper Swap
Clear Taillight w/LED Bulbs
Vortex 520 Conversion 14/47 RK Gold Chain
Shinko 006 Podium 150/60/18 rear 110/70/17 Front
More To Come
Yoshimura RS-3 Carbon Fiber Slip-on
02 R6 Caliper and MC Swap with S/S Lines
Dual Headlight Upper Swap
Clear Taillight w/LED Bulbs
Vortex 520 Conversion 14/47 RK Gold Chain
Shinko 006 Podium 150/60/18 rear 110/70/17 Front
More To Come
-
- Level 3.5
- Posts: 390
- Joined: Mon Jun 09, 2008 1:51 am
- Location: Mijas Costa, Malaga, Spain.
Re: Just bought a 750 FZR
Cool....or more like COOOL..
Q : have you fired up the engine yet??
Q : have you fired up the engine yet??
Re: Just bought a 750 FZR
No not yet. It's summer time you know... and i'm a litlle lazy now (more jobs to do, girls....... and girls )chefen2006 wrote:Cool....or more like COOOL..
Q : have you fired up the engine yet??
When i fire it up, you guys will be the 1st to know. I promise
THE COST OF YOUR HELMET, IT DEPENTS ON HOW MUCH EXPENSIVE YOU THINK YOUR HEAD IS.
Re: Just bought a 750 FZR
very nice build
1990 Yamaha FZR600 Genesis, Daily Driver
My FZR6 Rebuild
1985 GMC 4x4 T-15 X-Cab Sierra
1999 Chevy 4x4 Blazer (wifes car)
"If a man can build it, I can take it apart and sometimes even put it back together and fix it" --Unknown
"'I wish none of this had happened.' 'So do all who live to see such times. But that is not for them to decide. All we have to decide is what to do with the time that is given to us.....'" J.R.R. Tolkien
My FZR6 Rebuild
1985 GMC 4x4 T-15 X-Cab Sierra
1999 Chevy 4x4 Blazer (wifes car)
"If a man can build it, I can take it apart and sometimes even put it back together and fix it" --Unknown
"'I wish none of this had happened.' 'So do all who live to see such times. But that is not for them to decide. All we have to decide is what to do with the time that is given to us.....'" J.R.R. Tolkien
Re: Just bought a 750 FZR
I made a smsll damage on the mask, so i made a new one from the beggining. This is a photo with the windshield on. Just want you to see it.
And this is one with me bulding from the beggining the new mask base. My buddy Christos put a cuke there to remind me this is not an easy job.
And this is one with me bulding from the beggining the new mask base. My buddy Christos put a cuke there to remind me this is not an easy job.
THE COST OF YOUR HELMET, IT DEPENTS ON HOW MUCH EXPENSIVE YOU THINK YOUR HEAD IS.
- tampaFZR600
- Level 4.0
- Posts: 443
- Joined: Wed Mar 04, 2009 9:55 pm
- Location: Tampa
Re: Just bought a 750 FZR
get this baby painted! can't wait to see it finished
FZR 600 "bring back to life" project.... SHE LIVES!!!
FZR manual---->> http://commline.com/FZR/600/MANUAL/
Re: Just bought a 750 FZR
Today i paint the fairings with primer. Yes it's a pink primer. I thought i was watching the pink panther show!!!!!!
And in this pic you can see why i did. Cause i need to see where the defects were
Then i applied putty on any defect.
And graze the putty. Now the fairings are about to have one more primer cover, and then paintwork
And in this pic you can see why i did. Cause i need to see where the defects were
Then i applied putty on any defect.
And graze the putty. Now the fairings are about to have one more primer cover, and then paintwork
THE COST OF YOUR HELMET, IT DEPENTS ON HOW MUCH EXPENSIVE YOU THINK YOUR HEAD IS.
Re: Just bought a 750 FZR
What product are you using as the filler?
Yes, that is a Single Sided Swingarm FZR600 that I built.
Something is lurking, waiting, wanting to be built......It calls to me from the darkness....
I can finally see the light at the end of the tunnel....Then I realize that it is the train coming to run my ass over....
Something is lurking, waiting, wanting to be built......It calls to me from the darkness....
I can finally see the light at the end of the tunnel....Then I realize that it is the train coming to run my ass over....
Re: Just bought a 750 FZR
Hmmmmm.... i really have no idea I'll ask my buddy Nikos who paint it and post the product's name here tomorrow.cad600 wrote:What product are you using as the filler?
THE COST OF YOUR HELMET, IT DEPENTS ON HOW MUCH EXPENSIVE YOU THINK YOUR HEAD IS.
Re: Just bought a 750 FZR
Today we paint the 1st colour coat. It was the white one.
THE COST OF YOUR HELMET, IT DEPENTS ON HOW MUCH EXPENSIVE YOU THINK YOUR HEAD IS.
- trifgeorge
- Level 2.0
- Posts: 212
- Joined: Sun Jun 21, 2009 2:32 pm
- Location: Romania
- Contact:
Re: Just bought a 750 FZR
about that TCI unit.... i had the same problem. go to an electronist. he will know what to do. the thing is that the TCI unit has 2 fast switching transistors inside of it which are responsable for the timing on each coils. One transistor will send a signal to the coil on the left. The other one will send a signal to the coil on the right. Now the coil on the left provides sparks for pistons 1 and 4. The coil on the right provides sparks for pistons 2 and 3. If one of the transistors inside the TCI is burned or not working at it's optimum specs the sparks on the pistons that he is in charge of , are going to me missing or are going to be too weak to set the fuel mixture off.That is what is happening with your TCI unit. It's a cheap and easy fix if it's done by someoane qualified.I'm going to try to post some pics with the TCI unit.
the one surrounded with red was the BAD transistor. It was responsable for the sparks from pistons 2 and 3. Got it replaced. Make sure to tell the electronist to put some cooling paste between the transistor and it's heat sink.
the one surrounded with red was the BAD transistor. It was responsable for the sparks from pistons 2 and 3. Got it replaced. Make sure to tell the electronist to put some cooling paste between the transistor and it's heat sink.
1992 Yamaha FZR 600 3HE with:
GSX600F fully adjustable rebound forks
GSX600F front wheel with full floating disks
Sigma BC 1009 speedometer
YZF 600 Thundercat tank
Red Rizoma like grips
R6 pilot seat
Complete custom made tail with custom made rear seat
Led front and rear signals and tail light
Custom fiberglass electrics box
R6 Voltage regulator
Custom made rearset hangers
Custom made A123 LiFePO4 battery
KOSO mirrors
GSXR600SRAD swingarm-rear wheel assemby with 180/55/17 Michelin Pilot Power 2CT rear tyre
FZR1000 hydraulic clutch
H1 HID
Hand made mirror plates
GSX600F fully adjustable rebound forks
GSX600F front wheel with full floating disks
Sigma BC 1009 speedometer
YZF 600 Thundercat tank
Red Rizoma like grips
R6 pilot seat
Complete custom made tail with custom made rear seat
Led front and rear signals and tail light
Custom fiberglass electrics box
R6 Voltage regulator
Custom made rearset hangers
Custom made A123 LiFePO4 battery
KOSO mirrors
GSXR600SRAD swingarm-rear wheel assemby with 180/55/17 Michelin Pilot Power 2CT rear tyre
FZR1000 hydraulic clutch
H1 HID
Hand made mirror plates
- ragedigital
- 4000+ Posts
- Posts: 4153
- Joined: Wed May 07, 2008 9:30 am
- Location: Northwest St. Louis
Re: Just bought a 750 FZR
You can either upload the image to your GALLERY on FZROnline.com, or upload it to some other site, like Photobucket, then you can link from either. We don't have a direct upload option currently.trifgeorge wrote:I'm going to try to post some pics with the TCI unit.
[img]C:\Documents%20and%20Settings\George%20&%20Angy\Desktop\PREA-MULT-FUM-video\DSCN5273.jpg[/img]
Thanks for joining and participating in the most "active" FZR Community on the internet!
Re: Just bought a 750 FZR
o god were getting closer .... Next time im in Albania .. im gonna come check out your bike man ...
2002 R1 9k miles , Hotbodies undertail , Chopped Hindle Hi Mount , Solo Seat cowl,Frame sliders, little yellow yamaha wheel stickers .hehe
94' 600RR SOLD**
hid xenon
airtek solo tail
time for a 1000
R.I.P DaD 2/17/09 Your in my <3 always
- trifgeorge
- Level 2.0
- Posts: 212
- Joined: Sun Jun 21, 2009 2:32 pm
- Location: Romania
- Contact:
Re: Just bought a 750 FZR
you are welcome at anytimePIMPMYFZR wrote:o god were getting closer .... Next time im in Albania .. im gonna come check out your bike man ...
1992 Yamaha FZR 600 3HE with:
GSX600F fully adjustable rebound forks
GSX600F front wheel with full floating disks
Sigma BC 1009 speedometer
YZF 600 Thundercat tank
Red Rizoma like grips
R6 pilot seat
Complete custom made tail with custom made rear seat
Led front and rear signals and tail light
Custom fiberglass electrics box
R6 Voltage regulator
Custom made rearset hangers
Custom made A123 LiFePO4 battery
KOSO mirrors
GSXR600SRAD swingarm-rear wheel assemby with 180/55/17 Michelin Pilot Power 2CT rear tyre
FZR1000 hydraulic clutch
H1 HID
Hand made mirror plates
GSX600F fully adjustable rebound forks
GSX600F front wheel with full floating disks
Sigma BC 1009 speedometer
YZF 600 Thundercat tank
Red Rizoma like grips
R6 pilot seat
Complete custom made tail with custom made rear seat
Led front and rear signals and tail light
Custom fiberglass electrics box
R6 Voltage regulator
Custom made rearset hangers
Custom made A123 LiFePO4 battery
KOSO mirrors
GSXR600SRAD swingarm-rear wheel assemby with 180/55/17 Michelin Pilot Power 2CT rear tyre
FZR1000 hydraulic clutch
H1 HID
Hand made mirror plates