Adding r6 parts to FZR600

[aar0n]

Hey I found someone around here with an r6 swingarm and I am looking for an r6 tail to put on my fzr 600. I have an 89 and I am wondering what all will need to be replaced when I do these mods. I am of course going to get a new rear tire. Do I need a different chain? I know for the tail I will have to either make a new sub frame or mod the hell out of the one on there. Any comments would be appreciated. I am just really curious what all I have to do to make the swingarm and the tail work and look nice.

[tkclow]

Here are a couple links to check out:

R6 Swingarm swap http://fzronline.com/wiki/doku.php?id=r ... ngarm_swap

R6 tail swap http://heath.agdog.com/fzr/workbench/r6_tail_yzf_tank/

Most people that do the R6 tail do the YZF600 tank swap also so it looks cleaner/more updated. Or you could just glass the hole on the tank cover where the FZR seat sits on it as the R6 seat doesn't.

[Huckleberry]

r6 swingarm swap will require the R6 wheel, r6 rear caliper and mount, a 520 chain, 520 r6 rear sprocket, a kawi zx6r 520 front sprocket and about 2 hrs of grinding on the fzr frame. and a 1" drill bit (about 30$ at lowes or HD)

[Genesis]

I've done alot of R6 mods to my bike, as alot of members on the board have too, I would suggest take a browse through the Hybird Section