Alright well i just bought a 01-02 R6..And now i have to buy a Undertail..And i was wondering if this would work
Now that part as the bottom with it..So i was wondering if that would be ok with this subframe
And with that would i need to buy a undertail?.. Or no i can just get something to stick my licenses plate on..And would i be able to put some lights on? Backlights?
If you want to swap the subframe to the FZR frame it's not going to be "easy" they don't just bolt up. check with mrfreeze, we swapped an R1 and R6 subframe onto the FZR frame. You will need a welder.
92 FZR600
Yoshimura RS-3 Carbon Fiber Slip-on
02 R6 Caliper and MC Swap with S/S Lines
Dual Headlight Upper Swap
Clear Taillight w/LED Bulbs
Vortex 520 Conversion 14/47 RK Gold Chain
Shinko 006 Podium 150/60/18 rear 110/70/17 Front
More To Come
tkclow wrote:I don't know, maybe it's just me but that just looks kinda sketchy.
I have to aggree.. I think the way I'm doing it is a little sketchy. the best way is to get a matching r6 tail, subframe, fender. cut off the fzr frame and weld on attachment points for the r6 subframe
Last edited by Genesis on Fri Jun 26, 2009 4:46 pm, edited 1 time in total.
"If a man can build it, I can take it apart and sometimes even put it back together and fix it" --Unknown
"'I wish none of this had happened.' 'So do all who live to see such times. But that is not for them to decide. All we have to decide is what to do with the time that is given to us.....'" J.R.R. Tolkien
"If a man can build it, I can take it apart and sometimes even put it back together and fix it" --Unknown
"'I wish none of this had happened.' 'So do all who live to see such times. But that is not for them to decide. All we have to decide is what to do with the time that is given to us.....'" J.R.R. Tolkien
yamaha_george wrote:
+1K on that not nice to have the seat you are sitting go away at 80MPH do NOT ask How I know !!!
ooouuuucchhhhh
G,
It broke its tabs in an endurance race in the last hour and going into corners was use the frame rails as the seat moved with my butt & would hang up on a broken tab as I slid back up have to use extra force to get it back by counter pushing with the bike & my thighs. very hairy feeling for sure
Did a good impression of John Wayne's walk for a couple of days after
Genesis wrote:the best way is to get a matching r6 tail, subframe, fender. cut off the fzr frame and weld on attachment points for the r6 subframe
95FZR600 wrote:I suggest cutting the old sub off and mounting the whole new one on.
May not be as "easy" but a whole lot safer
+1K on that not nice to have the seat you are sitting go away at 80MPH do NOT ask How I know !!!
then i would do what target did, because the subframe cant fail because the fzr subframe is still there...so even if the r6 subfrrame on there failed, then your still sitting on the fzr subframe so no worries there
Shredex,
The BEST way is to make sub frame mounting lugs as per the later model bikes and mount that to the sub frame with bolts & safety pins or wires.
What happened to me is that the actual seat NOt the sub frame broke loose so as I moved arond hanging off the bike in corners it moved with me but gave grief when I tried to come back up right so it was snagged to my left at all time making right handers a real bitch as the seat dug in behind my knee with me wondering if it would suddenly snap free to the right pitching my body weight right on 120mph RH corners .
Not the most of relaxing rides, but buggered if I was gonna lose the 2nd place that our team had with a DNF of slip down way down with a pit stop.
..Just want to make it easy
I think the way I'm doing it is a little sketchy. the best way is to get a matching r6 tail, subframe, fender. cut off the fzr frame and weld on attachment points for the r6 subframe
ooouuuucchhhhh
