Intake valve fail, causes a miss at near all RPMs. Black shit coating the intake valve. I'm guessing it died or it's out of spec.
27k miles?
Intake
Moderators: Site Director, FZR Forum Moderators
-
megaloxana
- 2000+ Posts
- Posts: 2282
- Joined: Thu May 15, 2008 5:05 pm
- Location: Hanover, PA 17331
- Contact:
Re: Intake
Looks like you FZR'd the valve.
'92 FZR 600
Airtech R1 kit \*/ 520 conversion \*/ 14F-47R gearing
K&N pod filters \*/ Stage 3 jet kit \*/ Factory Pro shift kit \*/ Full V&H SS exhaust
Custom '02 R6 undertail \*/ YZF gas tank \*/ Raised via dogbones \*/ custom flush turnsignals
Full R6 brake set-up \*/ SS lines \*/ Progressive fork springs \*/ ZX2 coilpack
ADD YOURSELF TO THE OFFICIAL FZRONLINE GOOGLE EARTH MAP
Airtech R1 kit \*/ 520 conversion \*/ 14F-47R gearing
K&N pod filters \*/ Stage 3 jet kit \*/ Factory Pro shift kit \*/ Full V&H SS exhaust
Custom '02 R6 undertail \*/ YZF gas tank \*/ Raised via dogbones \*/ custom flush turnsignals
Full R6 brake set-up \*/ SS lines \*/ Progressive fork springs \*/ ZX2 coilpack
ADD YOURSELF TO THE OFFICIAL FZRONLINE GOOGLE EARTH MAP
Re: Intake
What's it's clearance?
http://www.michiganmobileservice.com/
“A common mistake that people make when trying to design something completely foolproof is to underestimate the ingenuity of complete fools.”-Douglas Adams
http://www.youtube.com/user/reelrazor
“A common mistake that people make when trying to design something completely foolproof is to underestimate the ingenuity of complete fools.”-Douglas Adams
http://www.youtube.com/user/reelrazor
Re: Intake
no idea yet, i broke the plug off in on that cylinder too, so out it all comes
Re: Intake
Check the clearances BEFORE you pull the head. Calculate what shims you need with the head mounted...If you check with teh head loose I dunno if it will change as the head is torqued..but it may. And it's just good practice. Shopes that set them (heads) up professionally will use torque plates.Model192 wrote:no idea yet, i broke the plug off in on that cylinder too, so out it all comes
http://www.michiganmobileservice.com/
“A common mistake that people make when trying to design something completely foolproof is to underestimate the ingenuity of complete fools.”-Douglas Adams
http://www.youtube.com/user/reelrazor
“A common mistake that people make when trying to design something completely foolproof is to underestimate the ingenuity of complete fools.”-Douglas Adams
http://www.youtube.com/user/reelrazor
Re: Intake
I didn't want to do it that way considering a few of them had junk on them and that one was just f*ck.
A plug was broken off in cylinder 3 so it had to come off anyway. When it's all clean then I'll check it and re-spec them.
What is the range about for stock shims? The downed one has a 181.
A plug was broken off in cylinder 3 so it had to come off anyway. When it's all clean then I'll check it and re-spec them.
What is the range about for stock shims? The downed one has a 181.