Spark plugs

FZR600 Forum

Moderators: Site Director, FZR Forum Moderators

Post Reply
Shocka311
Level 1.5
Level 1.5
Posts: 154
Joined: Wed Apr 15, 2009 3:30 am

Spark plugs

Post by Shocka311 »

What kind of spark plugs should I use in my 1990 600.
User avatar
shredex
2000+ Posts
2000+ Posts
Posts: 2768
Joined: Sun Sep 07, 2008 10:40 am
Location: Holiday, Florida
Contact:

Re: Spark plugs

Post by shredex »

our bikes take..
*NGK CR9E ($5.00/ea.) clymer/manual recommends
*NGK CR8E ($5.00/ea.)
*Autolite 4303 ($7.00/set of four)


autolite is the cheapest and i havent heard anything bad from them.
Image
Shocka311
Level 1.5
Level 1.5
Posts: 154
Joined: Wed Apr 15, 2009 3:30 am

Re: Spark plugs

Post by Shocka311 »

got some ngk cr8e's. What do I gap them to?
User avatar
shredex
2000+ Posts
2000+ Posts
Posts: 2768
Joined: Sun Sep 07, 2008 10:40 am
Location: Holiday, Florida
Contact:

Re: Spark plugs

Post by shredex »

they come ready to install...
Image
Shocka311
Level 1.5
Level 1.5
Posts: 154
Joined: Wed Apr 15, 2009 3:30 am

Re: Spark plugs

Post by Shocka311 »

Really? I don't have to gap them? Sweet
User avatar
ragedigital
4000+ Posts
4000+ Posts
Posts: 4153
Joined: Wed May 07, 2008 9:30 am
Location: Northwest St. Louis

Re: Spark plugs

Post by ragedigital »

GAP: 0.7-0.8 mm OR .028-.031 in

I have found the NGKs to be in that range everytime I buy them, but I still check them anyway.

darrin
Thanks for joining and participating in the most "active" FZR Community on the internet!
Shocka311
Level 1.5
Level 1.5
Posts: 154
Joined: Wed Apr 15, 2009 3:30 am

Re: Spark plugs

Post by Shocka311 »

ragedigital wrote:GAP: 0.7-0.8 mm OR .028-.031 in

I have found the NGKs to be in that range everytime I buy them, but I still check them anyway.

darrin
Well I checked them and they are in that range. I'll be puttin em in tomorrow so hopefully my bike'll run much better.
Post Reply