carb question

FZR600 Forum

Moderators: Site Director, FZR Forum Moderators

Post Reply
User avatar
ALMOST
50+ Posts
50+ Posts
Posts: 81
Joined: Sat May 10, 2008 4:15 pm
Location: Easton Maryland

carb question

Post by ALMOST »

Not sure if it is a jet of emultion tube thing. 1st and 2nd gear under 3000rmp. When I'm driving slow behind someone. I noticed a slite unevenness in rmp or maybe slite stumble . This can cause a little bit of a jecking motions with given a little accelaration;
"Going slow in a turn under 20 mph".
Now when I'm driving shall we say a little more spirited not a problem.
FZR 600 91 D&D
Ike
50+ Posts
50+ Posts
Posts: 58
Joined: Wed May 28, 2008 7:51 pm
Location: Normal, IL

Re: carb question

Post by Ike »

I think that is normal for some people
M in KC
Level 2.0
Level 2.0
Posts: 230
Joined: Fri May 09, 2008 8:47 am

Re: carb question

Post by M in KC »

Normal symptom. Try the -1, +2 sprocket setup in the 520 chain size. It will likely cure this symptom and give you better acceleration while only modestly limiting your top speed. Who drives these things at 120-130 anyway.
ThisEndUp
Level 1.5
Level 1.5
Posts: 185
Joined: Fri May 09, 2008 8:58 pm
Location: No. NJ

Re: carb question

Post by ThisEndUp »

Or get a Flo Commander to even out the air jet intake. (more expensive option)
'91 Yamaha FZR600
'09 Aprilia RS 125
'94 Ducati SS/CR 900
'75 Yamaha RD/TD350
'73 Suzuki TR500 Replica
Post Reply