Gurgle, deadish spot
Moderators: Site Director, FZR Forum Moderators
Gurgle, deadish spot
My bike accelerates fine under throttle (1/4, 1/2, 3/4, etc) through the rpm range but when I am cruising between 5-6k on the freeway (keeping a constant speed) the bike will sort of gurgle slightly. I won't lose speed or anything, but to GAIN speed i need to twist the throttle quite a bit.
Upgrades:
- Barnett Clutch------------------------------------------R6 Blue Dots, Front Master Brake Cylinder+Reservoir
WP Adjustable Rear Shock----------------------------Vortex 520 Conversion with RK GB520GXW Chain
V&H Header (4-1)--------------------------------------Swingarm Spool Mounts
Cobra F1r Exhaust Can--------------------------------R6 Voltage Regulator
Flo-Commander with Remote-------------------------Custom Airtech Passenger Seat
Stage 7 Jet kit with Diffuser Caps--------------------Factory Pro Nickel Emulsion Tubes
Wiseco 630 Kit------------------------------------------Custom Frame Slider Mounts
Modking Hydraulic Clutch Kit--------------------------Hella Projection Headlight with Xentec HID Kit (H9 Bulb)
Modking Aluminum Radiator Overflow Bottle--------
Re: Gurgle, deadish spot
check minor things first. whens the last time you replaced the plugs? cleaned carbs etc.
Re: Gurgle, deadish spot
Yah i'm going to try to replace the plugs later today and see if that does anything. Carbs were cleaned spring of last season and I run a little seafoam every oil change (supposed to keep the carbs from getting gummed up i think, or at least put off the need for cleaning them).
Upgrades:
- Barnett Clutch------------------------------------------R6 Blue Dots, Front Master Brake Cylinder+Reservoir
WP Adjustable Rear Shock----------------------------Vortex 520 Conversion with RK GB520GXW Chain
V&H Header (4-1)--------------------------------------Swingarm Spool Mounts
Cobra F1r Exhaust Can--------------------------------R6 Voltage Regulator
Flo-Commander with Remote-------------------------Custom Airtech Passenger Seat
Stage 7 Jet kit with Diffuser Caps--------------------Factory Pro Nickel Emulsion Tubes
Wiseco 630 Kit------------------------------------------Custom Frame Slider Mounts
Modking Hydraulic Clutch Kit--------------------------Hella Projection Headlight with Xentec HID Kit (H9 Bulb)
Modking Aluminum Radiator Overflow Bottle--------
Re: Gurgle, deadish spot
do you have stock or jett'd carbs?
that range is usually controlled by needle clip position
to check if its cause by a lean or rich condition, give the bike some choke and try it again,if its worse, you are rich, if it gets better, you are lean
that range is usually controlled by needle clip position
to check if its cause by a lean or rich condition, give the bike some choke and try it again,if its worse, you are rich, if it gets better, you are lean
93 Yamaha FZR 600 - Track Project
-in NOT AS MANY pieces for track, beater prep
SOLD
88 FZR1000, 90 FZR 1040, 03 Suzuki SV1000S, 06 R6 50th Anniversary
-in NOT AS MANY pieces for track, beater prep
SOLD
88 FZR1000, 90 FZR 1040, 03 Suzuki SV1000S, 06 R6 50th Anniversary
Re: Gurgle, deadish spot
Cool, i'll give that a try. I also just went in halfsies on a carb tuner tool with another member on the site so maybe that would help too?haunter wrote:do you have stock or jett'd carbs?
that range is usually controlled by needle clip position
to check if its cause by a lean or rich condition, give the bike some choke and try it again,if its worse, you are rich, if it gets better, you are lean
Upgrades:
- Barnett Clutch------------------------------------------R6 Blue Dots, Front Master Brake Cylinder+Reservoir
WP Adjustable Rear Shock----------------------------Vortex 520 Conversion with RK GB520GXW Chain
V&H Header (4-1)--------------------------------------Swingarm Spool Mounts
Cobra F1r Exhaust Can--------------------------------R6 Voltage Regulator
Flo-Commander with Remote-------------------------Custom Airtech Passenger Seat
Stage 7 Jet kit with Diffuser Caps--------------------Factory Pro Nickel Emulsion Tubes
Wiseco 630 Kit------------------------------------------Custom Frame Slider Mounts
Modking Hydraulic Clutch Kit--------------------------Hella Projection Headlight with Xentec HID Kit (H9 Bulb)
Modking Aluminum Radiator Overflow Bottle--------