Tell me where this belong- wiring
Moderators: Site Director, FZR Forum Moderators
-
megaloxana
- 2000+ Posts
- Posts: 2282
- Joined: Thu May 15, 2008 5:05 pm
- Location: Hanover, PA 17331
- Contact:
Tell me where this belong- wiring
Recently stripped the frame to paint and im feeding all wiring through the subframe again. I came across this part of the wiring harness and it appeared to only attach to the positive and grounds of the battery. It's rather hacked up. Anyway does anyone recall where this thing is supposed to be plugged into?
'92 FZR 600
Airtech R1 kit \*/ 520 conversion \*/ 14F-47R gearing
K&N pod filters \*/ Stage 3 jet kit \*/ Factory Pro shift kit \*/ Full V&H SS exhaust
Custom '02 R6 undertail \*/ YZF gas tank \*/ Raised via dogbones \*/ custom flush turnsignals
Full R6 brake set-up \*/ SS lines \*/ Progressive fork springs \*/ ZX2 coilpack
ADD YOURSELF TO THE OFFICIAL FZRONLINE GOOGLE EARTH MAP
Airtech R1 kit \*/ 520 conversion \*/ 14F-47R gearing
K&N pod filters \*/ Stage 3 jet kit \*/ Factory Pro shift kit \*/ Full V&H SS exhaust
Custom '02 R6 undertail \*/ YZF gas tank \*/ Raised via dogbones \*/ custom flush turnsignals
Full R6 brake set-up \*/ SS lines \*/ Progressive fork springs \*/ ZX2 coilpack
ADD YOURSELF TO THE OFFICIAL FZRONLINE GOOGLE EARTH MAP
Re: Tell me where this belong- wiring
I wanna say main relay...
Duane...
Bike:
1994 Yamaha FZR 1000 EXUP
Factory Pro Stage 1 Jetting | K&N Filter | Corbin Seat | ProTek Keyless Gas Cap | GSXR Mirrors
My Thread
Cage:
2005 Saab 9-7x 5.3i Arc AWD
THE WIKI IS YOUR FRIEND
THE SEARCH IS YOUR SIGNIFICANT OTHER
USE THEM!!
Bike:
1994 Yamaha FZR 1000 EXUP
Factory Pro Stage 1 Jetting | K&N Filter | Corbin Seat | ProTek Keyless Gas Cap | GSXR Mirrors
My Thread
Cage:
2005 Saab 9-7x 5.3i Arc AWD
THE WIKI IS YOUR FRIEND
THE SEARCH IS YOUR SIGNIFICANT OTHER
USE THEM!!
Re: Tell me where this belong- wiring
wow, that is all hacked up. best of luck. it does look like main relay. make sure by looking on the wiring diagram.
2002 Yamaha R6-----2003 Yamaha R6
-
shredex
- 2000+ Posts
- Posts: 2768
- Joined: Sun Sep 07, 2008 10:40 am
- Location: Holiday, Florida
- Contact:
Re: Tell me where this belong- wiring
ex-up?
that fuse is aftermarket..
i take pics off what my stuff looks like and where it goes before I remove stuff then I have something to look at when putting it back together.
that fuse is aftermarket..
i take pics off what my stuff looks like and where it goes before I remove stuff then I have something to look at when putting it back together.
-
demon_knight69
- Level 4.5
- Posts: 488
- Joined: Sat May 10, 2008 9:49 am
- Location: Mesa, Arizona
Re: Tell me where this belong- wiring
that black fuse holder looks like one of two things.
a. the wire for the horn
b. part of the ignition system (in front of the VR, behind the left tail fairing when sitting on the bike)
my
a. the wire for the horn
b. part of the ignition system (in front of the VR, behind the left tail fairing when sitting on the bike)
my
1996 FZR 600
Custom exhaust made from R6 header and GSXR600 end pipe
K&N Pods
Barnett Clutch
Factory Pro shift kit
Needs paint and on her way to being a streetfighter
Custom exhaust made from R6 header and GSXR600 end pipe
K&N Pods
Barnett Clutch
Factory Pro shift kit
Needs paint and on her way to being a streetfighter
-
shredex
- 2000+ Posts
- Posts: 2768
- Joined: Sun Sep 07, 2008 10:40 am
- Location: Holiday, Florida
- Contact:
Re: Tell me where this belong- wiring
demon_knight69 wrote:that black fuse holder looks like one of two things.
a. the wire for the horn
b. part of the ignition system (in front of the VR, behind the left tail fairing when sitting on the bike)
my
you mean the CDI/TCI?
the white plug might be what plugs into your cdi box, but it would be connected to the main harness and all
-
megaloxana
- 2000+ Posts
- Posts: 2282
- Joined: Thu May 15, 2008 5:05 pm
- Location: Hanover, PA 17331
- Contact:
Re: Tell me where this belong- wiring
Well whatever it went to, it's not going back. It doesn't plug into anything that is currently on my bike.
'92 FZR 600
Airtech R1 kit \*/ 520 conversion \*/ 14F-47R gearing
K&N pod filters \*/ Stage 3 jet kit \*/ Factory Pro shift kit \*/ Full V&H SS exhaust
Custom '02 R6 undertail \*/ YZF gas tank \*/ Raised via dogbones \*/ custom flush turnsignals
Full R6 brake set-up \*/ SS lines \*/ Progressive fork springs \*/ ZX2 coilpack
ADD YOURSELF TO THE OFFICIAL FZRONLINE GOOGLE EARTH MAP
Airtech R1 kit \*/ 520 conversion \*/ 14F-47R gearing
K&N pod filters \*/ Stage 3 jet kit \*/ Factory Pro shift kit \*/ Full V&H SS exhaust
Custom '02 R6 undertail \*/ YZF gas tank \*/ Raised via dogbones \*/ custom flush turnsignals
Full R6 brake set-up \*/ SS lines \*/ Progressive fork springs \*/ ZX2 coilpack
ADD YOURSELF TO THE OFFICIAL FZRONLINE GOOGLE EARTH MAP
Re: Tell me where this belong- wiring
It looks like a hacked in power supply for an accessory to me. That IS an aftermarket inline fuse holder. Looks like they found a keyed 'on' hot wire and gaacked it in there.
http://www.michiganmobileservice.com/
“A common mistake that people make when trying to design something completely foolproof is to underestimate the ingenuity of complete fools.”-Douglas Adams
http://www.youtube.com/user/reelrazor
“A common mistake that people make when trying to design something completely foolproof is to underestimate the ingenuity of complete fools.”-Douglas Adams
http://www.youtube.com/user/reelrazor
Re: Tell me where this belong- wiring
Razor's right. Looks like a hacked wiring harness for a car stereo now that I look at it again.reelrazor wrote:It looks like a hacked in power supply for an accessory to me. That IS an aftermarket inline fuse holder. Looks like they found a keyed 'on' hot wire and gaacked it in there.
Duane...
Bike:
1994 Yamaha FZR 1000 EXUP
Factory Pro Stage 1 Jetting | K&N Filter | Corbin Seat | ProTek Keyless Gas Cap | GSXR Mirrors
My Thread
Cage:
2005 Saab 9-7x 5.3i Arc AWD
THE WIKI IS YOUR FRIEND
THE SEARCH IS YOUR SIGNIFICANT OTHER
USE THEM!!
Bike:
1994 Yamaha FZR 1000 EXUP
Factory Pro Stage 1 Jetting | K&N Filter | Corbin Seat | ProTek Keyless Gas Cap | GSXR Mirrors
My Thread
Cage:
2005 Saab 9-7x 5.3i Arc AWD
THE WIKI IS YOUR FRIEND
THE SEARCH IS YOUR SIGNIFICANT OTHER
USE THEM!!
-
megaloxana
- 2000+ Posts
- Posts: 2282
- Joined: Thu May 15, 2008 5:05 pm
- Location: Hanover, PA 17331
- Contact:
Re: Tell me where this belong- wiring
ahh yes...previous fzr owners never fail to amaze me
'92 FZR 600
Airtech R1 kit \*/ 520 conversion \*/ 14F-47R gearing
K&N pod filters \*/ Stage 3 jet kit \*/ Factory Pro shift kit \*/ Full V&H SS exhaust
Custom '02 R6 undertail \*/ YZF gas tank \*/ Raised via dogbones \*/ custom flush turnsignals
Full R6 brake set-up \*/ SS lines \*/ Progressive fork springs \*/ ZX2 coilpack
ADD YOURSELF TO THE OFFICIAL FZRONLINE GOOGLE EARTH MAP
Airtech R1 kit \*/ 520 conversion \*/ 14F-47R gearing
K&N pod filters \*/ Stage 3 jet kit \*/ Factory Pro shift kit \*/ Full V&H SS exhaust
Custom '02 R6 undertail \*/ YZF gas tank \*/ Raised via dogbones \*/ custom flush turnsignals
Full R6 brake set-up \*/ SS lines \*/ Progressive fork springs \*/ ZX2 coilpack
ADD YOURSELF TO THE OFFICIAL FZRONLINE GOOGLE EARTH MAP
-
shredex
- 2000+ Posts
- Posts: 2768
- Joined: Sun Sep 07, 2008 10:40 am
- Location: Holiday, Florida
- Contact:
Re: Tell me where this belong- wiring
well keep it handy because that white plug looks like the male connector im going to need once I get my r1 headlight harness 
see female plug vvvv not sure though, wont know till i get it.
see female plug vvvv not sure though, wont know till i get it.