NIPPLES!!!!!!! (sfw)

FZR600 Forum

Moderators: Site Director, FZR Forum Moderators

Post Reply
User avatar
DEMORAL1ZE
100+ Posts
100+ Posts
Posts: 141
Joined: Mon Oct 13, 2008 10:32 am
Location: SOUTHEAST MISSOURI--------LAND OF THE FREE, HOME OF THE BRAVE

NIPPLES!!!!!!! (sfw)

Post by DEMORAL1ZE »

Does anyone know what thread the plugs are for syncing the carbs...had heard they were 6mm. just wondering if that is 6mmx1.0 or some type of 6mm npt. Found these on evilbay
http://cgi.ebay.com/2-NIPPLES-M6-WATERC ... 0381140527

any comments are welcome bandana
YOU CAN TWIST PERCEPTION BUT REALITY WON'T BUDGE
Top
DonTZ125
Moderator
Posts: 2214
Joined: Tue Dec 02, 2008 11:20 pm
Location: Scarberia, ON
Contact:
Contact DonTZ125

Re: NIPPLES!!!!!!! (sfw)

Post by DonTZ125 »

http://motionpro.com/motorcycle/partno/08-0040/
Top
User avatar
megaloxana
2000+ Posts
2000+ Posts
Posts: 2282
Joined: Thu May 15, 2008 5:05 pm
Location: Hanover, PA 17331
Contact:
Contact megaloxana

Re: NIPPLES!!!!!!! (sfw)

Post by megaloxana »

I know they're M6 thread. I think 6mm x 1.0 I'll double check when I get home tonight.

I went to homedepot and picked up some mig welding tips.
They looked just like this:

Image
'92 FZR 600
Airtech R1 kit \*/ 520 conversion \*/ 14F-47R gearing
K&N pod filters \*/ Stage 3 jet kit \*/ Factory Pro shift kit \*/ Full V&H SS exhaust
Custom '02 R6 undertail \*/ YZF gas tank \*/ Raised via dogbones \*/ custom flush turnsignals
Full R6 brake set-up \*/ SS lines \*/ Progressive fork springs \*/ ZX2 coilpack


ADD YOURSELF TO THE OFFICIAL FZRONLINE GOOGLE EARTH MAP :bunny :banjoman
Top
yamaha_george
5000+ Posts
5000+ Posts
Posts: 5853
Joined: Fri May 09, 2008 8:46 am
Location: west london UK

Re: NIPPLES!!!!!!! (sfw)

Post by yamaha_george »

megaloxana wrote:I know they're M6 thread. I think 6mm x 1.0 I'll double check when I get home tonight.

I went to homedepot and picked up some mig welding tips.
They looked just like this:
M,
They are in deed 6mm * 1mm pitch threads I know 'cause i made my own
Top
User avatar
the_finch
Level 8.5
Level 8.5
Posts: 882
Joined: Tue Jun 03, 2008 8:06 pm
Location: Midland City, AL / UAHuntsville, Huntsville, AL

Re: NIPPLES!!!!!!! (sfw)

Post by the_finch »

megaloxana wrote:I know they're M6 thread. I think 6mm x 1.0 I'll double check when I get home tonight.

I went to homedepot and picked up some mig welding tips.
They looked just like this:

Image
Have you tried the MIG tips yet?
Image
1997 FZR600RJ

Engine: K&N Drop-in air filter - stock airbox - FP 5°ignition advancer - EBC "Street Racer" Kevlar clutch
Exhaust: Stock header - Yoshimura RS-3 Carbon fiber slip-on
Body: Original paint/graphics - Clear Alternatives integrated LED Taillight - Flanders' flush front signals - YZF600 Mirrors - Comp. Werkes Stainless fender eliminator/tag bracket - 60w/55w H4 headlights
Tires: Metzler MEZ4B 120/70 ZR17 Front - Michelin Madacam 100x 150/70 ZR18 Rear
Brakes:Stock rotors with EBC HH Sinstered pads
In the works: YZF600 header, '97 Bandit 600 rear wheel, DynoJet Stage 3, Racetech Springs and Emulators fork rebuild, FZ1 rear shock, YZF600 front MC, Galfer SS Lines, CFM rearsets
Top
User avatar
megaloxana
2000+ Posts
2000+ Posts
Posts: 2282
Joined: Thu May 15, 2008 5:05 pm
Location: Hanover, PA 17331
Contact:
Contact megaloxana

Re: NIPPLES!!!!!!! (sfw)

Post by megaloxana »

the_finch wrote:Have you tried the MIG tips yet?
yes I have. Just becareful unscrewing them cuz they get really hot.
'92 FZR 600
Airtech R1 kit \*/ 520 conversion \*/ 14F-47R gearing
K&N pod filters \*/ Stage 3 jet kit \*/ Factory Pro shift kit \*/ Full V&H SS exhaust
Custom '02 R6 undertail \*/ YZF gas tank \*/ Raised via dogbones \*/ custom flush turnsignals
Full R6 brake set-up \*/ SS lines \*/ Progressive fork springs \*/ ZX2 coilpack


ADD YOURSELF TO THE OFFICIAL FZRONLINE GOOGLE EARTH MAP :bunny :banjoman
Top
User avatar
the_finch
Level 8.5
Level 8.5
Posts: 882
Joined: Tue Jun 03, 2008 8:06 pm
Location: Midland City, AL / UAHuntsville, Huntsville, AL

Re: NIPPLES!!!!!!! (sfw)

Post by the_finch »

megaloxana wrote:
the_finch wrote:Have you tried the MIG tips yet?
yes I have. Just becareful unscrewing them cuz they get really hot.
Ah. I was wondering what it was that smelled like grilled sirloin tips.
Image
1997 FZR600RJ

Engine: K&N Drop-in air filter - stock airbox - FP 5°ignition advancer - EBC "Street Racer" Kevlar clutch
Exhaust: Stock header - Yoshimura RS-3 Carbon fiber slip-on
Body: Original paint/graphics - Clear Alternatives integrated LED Taillight - Flanders' flush front signals - YZF600 Mirrors - Comp. Werkes Stainless fender eliminator/tag bracket - 60w/55w H4 headlights
Tires: Metzler MEZ4B 120/70 ZR17 Front - Michelin Madacam 100x 150/70 ZR18 Rear
Brakes:Stock rotors with EBC HH Sinstered pads
In the works: YZF600 header, '97 Bandit 600 rear wheel, DynoJet Stage 3, Racetech Springs and Emulators fork rebuild, FZ1 rear shock, YZF600 front MC, Galfer SS Lines, CFM rearsets
Top
Post Reply

Return to “FZR600”