Rear sets
Moderators: Site Director, FZR Forum Moderators
Re: Rear sets
I know cad600 cut off his old brackets and welded on new ones for the upgraded rear sets. That might be our only option.
2002 Yamaha R6-----2003 Yamaha R6
-
megaloxana
- 2000+ Posts
- Posts: 2282
- Joined: Thu May 15, 2008 5:05 pm
- Location: Hanover, PA 17331
- Contact:
Re: Rear sets
I took some shots to compare the '05 r6 rearset to the fzr. Click on the picture to see a larger version. Notice how the shift rod is on top on the R6 while the fzr is under.
A better shot of how the R6 shift rod is way out of alignment
Breakthrough?! It seems that the top bolt for the heel gaurd, and the top bolt for shifter are in alignment with the R6 rear set. Here's the R6 rearset bolted onto the fzr. You will need about a 1/4" spacer on the bottom bolt.
Same Picture but I have the R6 shift lever bolted on too.
I tried to unbolt the FZR shift lever from the stock rearset but I almost stripped out the bolt. I'm almost positive that you will be able to bolt on the fzr shift lever onto the R6 shift lever. Then you will only have to extend the shift rod. If you did that however, the fzr lever is about an inch or so longer than the R6 lever.
A better shot of how the R6 shift rod is way out of alignment
Breakthrough?! It seems that the top bolt for the heel gaurd, and the top bolt for shifter are in alignment with the R6 rear set. Here's the R6 rearset bolted onto the fzr. You will need about a 1/4" spacer on the bottom bolt.
Same Picture but I have the R6 shift lever bolted on too.
I tried to unbolt the FZR shift lever from the stock rearset but I almost stripped out the bolt. I'm almost positive that you will be able to bolt on the fzr shift lever onto the R6 shift lever. Then you will only have to extend the shift rod. If you did that however, the fzr lever is about an inch or so longer than the R6 lever.
'92 FZR 600
Airtech R1 kit \*/ 520 conversion \*/ 14F-47R gearing
K&N pod filters \*/ Stage 3 jet kit \*/ Factory Pro shift kit \*/ Full V&H SS exhaust
Custom '02 R6 undertail \*/ YZF gas tank \*/ Raised via dogbones \*/ custom flush turnsignals
Full R6 brake set-up \*/ SS lines \*/ Progressive fork springs \*/ ZX2 coilpack
ADD YOURSELF TO THE OFFICIAL FZRONLINE GOOGLE EARTH MAP
Airtech R1 kit \*/ 520 conversion \*/ 14F-47R gearing
K&N pod filters \*/ Stage 3 jet kit \*/ Factory Pro shift kit \*/ Full V&H SS exhaust
Custom '02 R6 undertail \*/ YZF gas tank \*/ Raised via dogbones \*/ custom flush turnsignals
Full R6 brake set-up \*/ SS lines \*/ Progressive fork springs \*/ ZX2 coilpack
ADD YOURSELF TO THE OFFICIAL FZRONLINE GOOGLE EARTH MAP
Re: Rear sets
I think your best bet would be to get an aftermarket one like I did, or a set with the linkage connecting on the bottom. Notice how the shift linkage is at the bottom like the FZR's in my pic. I would just have to get the mounting plates made, and a longer shift rod. That's it, I think!!! I'll see in a couple weeks....
-
megaloxana
- 2000+ Posts
- Posts: 2282
- Joined: Thu May 15, 2008 5:05 pm
- Location: Hanover, PA 17331
- Contact:
Re: Rear sets
How much?Dragon wrote:So, I just scored a universal set up.
What you think guys?
http://i60.photobucket.com/albums/h15/n ... 1226912497
All I need now is some brackets to mount them, anyone have access to a mill?
Pm me if you could help me out, and I'll give the dimensions I need for the brackets.
I'll try and figure out the shift linkage deal when they arrive, something got to work.
I'll start a new thread with the installation. Still got other parts to swap out also, but thissnow & cold weather got me not wanting to touch the fizz yet. Maybe I'll start when I get the rear sets. LOL2
'92 FZR 600
Airtech R1 kit \*/ 520 conversion \*/ 14F-47R gearing
K&N pod filters \*/ Stage 3 jet kit \*/ Factory Pro shift kit \*/ Full V&H SS exhaust
Custom '02 R6 undertail \*/ YZF gas tank \*/ Raised via dogbones \*/ custom flush turnsignals
Full R6 brake set-up \*/ SS lines \*/ Progressive fork springs \*/ ZX2 coilpack
ADD YOURSELF TO THE OFFICIAL FZRONLINE GOOGLE EARTH MAP
Airtech R1 kit \*/ 520 conversion \*/ 14F-47R gearing
K&N pod filters \*/ Stage 3 jet kit \*/ Factory Pro shift kit \*/ Full V&H SS exhaust
Custom '02 R6 undertail \*/ YZF gas tank \*/ Raised via dogbones \*/ custom flush turnsignals
Full R6 brake set-up \*/ SS lines \*/ Progressive fork springs \*/ ZX2 coilpack
ADD YOURSELF TO THE OFFICIAL FZRONLINE GOOGLE EARTH MAP
Re: Rear sets
megaloxana wrote:How much?Dragon wrote:So, I just scored a universal set up.
What you think guys?
http://i60.photobucket.com/albums/h15/n ... 1226912497
All I need now is some brackets to mount them, anyone have access to a mill?
Pm me if you could help me out, and I'll give the dimensions I need for the brackets.
I'll try and figure out the shift linkage deal when they arrive, something got to work.
I'll start a new thread with the installation. Still got other parts to swap out also, but this
I forgot to share that!!
$88 US shipped ,and that's only because I won the auction.
-
megaloxana
- 2000+ Posts
- Posts: 2282
- Joined: Thu May 15, 2008 5:05 pm
- Location: Hanover, PA 17331
- Contact:
Re: Rear sets
you lucky sobDragon wrote:$88 US shipped
'92 FZR 600
Airtech R1 kit \*/ 520 conversion \*/ 14F-47R gearing
K&N pod filters \*/ Stage 3 jet kit \*/ Factory Pro shift kit \*/ Full V&H SS exhaust
Custom '02 R6 undertail \*/ YZF gas tank \*/ Raised via dogbones \*/ custom flush turnsignals
Full R6 brake set-up \*/ SS lines \*/ Progressive fork springs \*/ ZX2 coilpack
ADD YOURSELF TO THE OFFICIAL FZRONLINE GOOGLE EARTH MAP
Airtech R1 kit \*/ 520 conversion \*/ 14F-47R gearing
K&N pod filters \*/ Stage 3 jet kit \*/ Factory Pro shift kit \*/ Full V&H SS exhaust
Custom '02 R6 undertail \*/ YZF gas tank \*/ Raised via dogbones \*/ custom flush turnsignals
Full R6 brake set-up \*/ SS lines \*/ Progressive fork springs \*/ ZX2 coilpack
ADD YOURSELF TO THE OFFICIAL FZRONLINE GOOGLE EARTH MAP
Re: Rear sets
Yes, I was really lucky!!megaloxana wrote:you lucky sobDragon wrote:$88 US shipped
Were you bidding on it?
-
megaloxana
- 2000+ Posts
- Posts: 2282
- Joined: Thu May 15, 2008 5:05 pm
- Location: Hanover, PA 17331
- Contact:
Re: Rear sets
No i wasn't...heck of a price though.Dragon wrote:Yes, I was really lucky!!megaloxana wrote:you lucky sobDragon wrote:$88 US shipped
Were you bidding on it?
'92 FZR 600
Airtech R1 kit \*/ 520 conversion \*/ 14F-47R gearing
K&N pod filters \*/ Stage 3 jet kit \*/ Factory Pro shift kit \*/ Full V&H SS exhaust
Custom '02 R6 undertail \*/ YZF gas tank \*/ Raised via dogbones \*/ custom flush turnsignals
Full R6 brake set-up \*/ SS lines \*/ Progressive fork springs \*/ ZX2 coilpack
ADD YOURSELF TO THE OFFICIAL FZRONLINE GOOGLE EARTH MAP
Airtech R1 kit \*/ 520 conversion \*/ 14F-47R gearing
K&N pod filters \*/ Stage 3 jet kit \*/ Factory Pro shift kit \*/ Full V&H SS exhaust
Custom '02 R6 undertail \*/ YZF gas tank \*/ Raised via dogbones \*/ custom flush turnsignals
Full R6 brake set-up \*/ SS lines \*/ Progressive fork springs \*/ ZX2 coilpack
ADD YOURSELF TO THE OFFICIAL FZRONLINE GOOGLE EARTH MAP
Re: Rear sets
Are those the after market ones from China?Dragon wrote:So, I just scored a universal set up.
What you think guys?
http://i60.photobucket.com/albums/h15/n ... 1226912497
All I need now is some brackets to mount them, anyone have access to a mill?
Pm me if you could help me out, and I'll give the dimensions I need for the brackets.
I'll try and figure out the shift linkage deal when they arrive, something got to work.
I'll start a new thread with the installation. Still got other parts to swap out also, but this
Not china steve but the country.
2002 Yamaha R6-----2003 Yamaha R6
-
megaloxana
- 2000+ Posts
- Posts: 2282
- Joined: Thu May 15, 2008 5:05 pm
- Location: Hanover, PA 17331
- Contact:
Re: Rear sets
They're Yoshimura actually. Japanese.95FZR600 wrote:Are those the after market ones from China?Dragon wrote:So, I just scored a universal set up.
What you think guys?
http://i60.photobucket.com/albums/h15/n ... 1226912497
All I need now is some brackets to mount them, anyone have access to a mill?
Pm me if you could help me out, and I'll give the dimensions I need for the brackets.
I'll try and figure out the shift linkage deal when they arrive, something got to work.
I'll start a new thread with the installation. Still got other parts to swap out also, but this
Not china steve but the country.
'92 FZR 600
Airtech R1 kit \*/ 520 conversion \*/ 14F-47R gearing
K&N pod filters \*/ Stage 3 jet kit \*/ Factory Pro shift kit \*/ Full V&H SS exhaust
Custom '02 R6 undertail \*/ YZF gas tank \*/ Raised via dogbones \*/ custom flush turnsignals
Full R6 brake set-up \*/ SS lines \*/ Progressive fork springs \*/ ZX2 coilpack
ADD YOURSELF TO THE OFFICIAL FZRONLINE GOOGLE EARTH MAP
Airtech R1 kit \*/ 520 conversion \*/ 14F-47R gearing
K&N pod filters \*/ Stage 3 jet kit \*/ Factory Pro shift kit \*/ Full V&H SS exhaust
Custom '02 R6 undertail \*/ YZF gas tank \*/ Raised via dogbones \*/ custom flush turnsignals
Full R6 brake set-up \*/ SS lines \*/ Progressive fork springs \*/ ZX2 coilpack
ADD YOURSELF TO THE OFFICIAL FZRONLINE GOOGLE EARTH MAP
-
megaloxana
- 2000+ Posts
- Posts: 2282
- Joined: Thu May 15, 2008 5:05 pm
- Location: Hanover, PA 17331
- Contact:
Re: Rear sets
Hey dragon, did you get those rearsets in yet?
'92 FZR 600
Airtech R1 kit \*/ 520 conversion \*/ 14F-47R gearing
K&N pod filters \*/ Stage 3 jet kit \*/ Factory Pro shift kit \*/ Full V&H SS exhaust
Custom '02 R6 undertail \*/ YZF gas tank \*/ Raised via dogbones \*/ custom flush turnsignals
Full R6 brake set-up \*/ SS lines \*/ Progressive fork springs \*/ ZX2 coilpack
ADD YOURSELF TO THE OFFICIAL FZRONLINE GOOGLE EARTH MAP
Airtech R1 kit \*/ 520 conversion \*/ 14F-47R gearing
K&N pod filters \*/ Stage 3 jet kit \*/ Factory Pro shift kit \*/ Full V&H SS exhaust
Custom '02 R6 undertail \*/ YZF gas tank \*/ Raised via dogbones \*/ custom flush turnsignals
Full R6 brake set-up \*/ SS lines \*/ Progressive fork springs \*/ ZX2 coilpack
ADD YOURSELF TO THE OFFICIAL FZRONLINE GOOGLE EARTH MAP
Re: Rear sets
megaloxana wrote:Hey dragon, did you get those rearsets in yet?
LOL2 Not yet, in a week or so.....
Coming from over seas, so you know the shipping is going to take about 2 weeks,etc...
Can't wait to get them though, so I can get the the brackets made.
-
megaloxana
- 2000+ Posts
- Posts: 2282
- Joined: Thu May 15, 2008 5:05 pm
- Location: Hanover, PA 17331
- Contact:
Re: Rear sets
Alright well don't hold out when you get them. I can't wait to see them and hear your opinion.Dragon wrote:Not yet, in a week or so.....
Coming from over seas, so you know the shipping is going to take about 2 weeks,etc...
Can't wait to get them though, so I can get the the brackets made.
'92 FZR 600
Airtech R1 kit \*/ 520 conversion \*/ 14F-47R gearing
K&N pod filters \*/ Stage 3 jet kit \*/ Factory Pro shift kit \*/ Full V&H SS exhaust
Custom '02 R6 undertail \*/ YZF gas tank \*/ Raised via dogbones \*/ custom flush turnsignals
Full R6 brake set-up \*/ SS lines \*/ Progressive fork springs \*/ ZX2 coilpack
ADD YOURSELF TO THE OFFICIAL FZRONLINE GOOGLE EARTH MAP
Airtech R1 kit \*/ 520 conversion \*/ 14F-47R gearing
K&N pod filters \*/ Stage 3 jet kit \*/ Factory Pro shift kit \*/ Full V&H SS exhaust
Custom '02 R6 undertail \*/ YZF gas tank \*/ Raised via dogbones \*/ custom flush turnsignals
Full R6 brake set-up \*/ SS lines \*/ Progressive fork springs \*/ ZX2 coilpack
ADD YOURSELF TO THE OFFICIAL FZRONLINE GOOGLE EARTH MAP
Re: Rear sets
I sure will give my opinion, and more pics.megaloxana wrote:Alright well don't hold out when you get them. I can't wait to see them and hear your opinion.Dragon wrote:Not yet, in a week or so.....
Coming from over seas, so you know the shipping is going to take about 2 weeks,etc...
Can't wait to get them though, so I can get the the brackets made.