Rear sets

FZR600 Forum

Moderators: Site Director, FZR Forum Moderators

Post Reply
User avatar
slayermd
Level 5.0
Level 5.0
Posts: 521
Joined: Sat Aug 09, 2008 3:20 pm
Location: Westminster Colorado
Contact:
Contact slayermd

Re: Rear sets

Post by slayermd »

Dragon wrote:
Back to the drawing board! banghead
Not yet.

Even if you did whack the frame mounts you still would have to figure out the linkage. There are plenty of bikes that use the FZR style linkage like many years of the GSXR and CBR. I think the plate would be the best way to for a easy swap.
Top
User avatar
95FZR600
2000+ Posts
2000+ Posts
Posts: 2972
Joined: Sat May 31, 2008 10:41 pm
Location: Kennesaw, Georgia

Re: Rear sets

Post by 95FZR600 »

It would work with the plate as long as you use only one type like the vortex ones. It would have to be from the right year to make it work with the linkages. Im guessing something like the 99-02 R6 or R1. Maybe even the older Gixxer models.
2002 Yamaha R6-----2003 Yamaha R6

Image
Top
User avatar
shredex
2000+ Posts
2000+ Posts
Posts: 2768
Joined: Sun Sep 07, 2008 10:40 am
Location: Holiday, Florida
Contact:
Contact shredex

Re: Rear sets

Post by shredex »

well....I was going to show you pics of Tlc2cann 2004 r6 rear sets on his bike from the archives...
but it looks like they have been deleted

he has one pic...
Image

he made an aluminum bracket thats bolts to the stock rear set mount and mounts the r6 rearset
Image
Top
User avatar
slayermd
Level 5.0
Level 5.0
Posts: 521
Joined: Sat Aug 09, 2008 3:20 pm
Location: Westminster Colorado
Contact:
Contact slayermd

Re: Rear sets

Post by slayermd »

Thats a clean looking bike.
Top
User avatar
shredex
2000+ Posts
2000+ Posts
Posts: 2768
Joined: Sun Sep 07, 2008 10:40 am
Location: Holiday, Florida
Contact:
Contact shredex

Re: Rear sets

Post by shredex »

slayermd wrote:Thats a clean looking bike.
he is the only one besides us putting 04-06 r1 fairings on his bike.
he has a 08 r1 tail though.
he has more pics, like with the fairings and engine in...but they arnt working

here is his thread
http://www.fzrarchives.com/ipb/index.ph ... opic=38541




oh yea and

:bunny :banjoman :banana: this is my 1000th post on the forums! :bunny :banjoman :banana:
Last edited by shredex on Sat Dec 27, 2008 2:31 am, edited 1 time in total.
Image
Top
User avatar
megaloxana
2000+ Posts
2000+ Posts
Posts: 2282
Joined: Thu May 15, 2008 5:05 pm
Location: Hanover, PA 17331
Contact:
Contact megaloxana

Re: Rear sets

Post by megaloxana »

I have an '05 R6 shift side stock rearset and the linkage doesn't come close to being able to be used. The bolts holes aren't close either.
'92 FZR 600
Airtech R1 kit \*/ 520 conversion \*/ 14F-47R gearing
K&N pod filters \*/ Stage 3 jet kit \*/ Factory Pro shift kit \*/ Full V&H SS exhaust
Custom '02 R6 undertail \*/ YZF gas tank \*/ Raised via dogbones \*/ custom flush turnsignals
Full R6 brake set-up \*/ SS lines \*/ Progressive fork springs \*/ ZX2 coilpack


ADD YOURSELF TO THE OFFICIAL FZRONLINE GOOGLE EARTH MAP :bunny :banjoman
Top
thatkid
2000+ Posts
2000+ Posts
Posts: 2026
Joined: Sun May 18, 2008 1:25 am
Location: Chicago, IL
Contact:
Contact thatkid

Re: Rear sets

Post by thatkid »

megaloxana wrote:I have an '05 R6 shift side stock rearset and the linkage doesn't come close to being able to be used. The bolts holes aren't close either.
Can you get me some good pictures of it? I'd like to see if it's a simple fix with the idea in my head.
Image
Do YOU Scopper?

"When some people cry, it's not because they’re weak. It’s because they’ve been strong for far too long."
Top
User avatar
megaloxana
2000+ Posts
2000+ Posts
Posts: 2282
Joined: Thu May 15, 2008 5:05 pm
Location: Hanover, PA 17331
Contact:
Contact megaloxana

Re: Rear sets

Post by megaloxana »

thatkid wrote:
megaloxana wrote:I have an '05 R6 shift side stock rearset and the linkage doesn't come close to being able to be used. The bolts holes aren't close either.
Can you get me some good pictures of it? I'd like to see if it's a simple fix with the idea in my head.
Sure thing
'92 FZR 600
Airtech R1 kit \*/ 520 conversion \*/ 14F-47R gearing
K&N pod filters \*/ Stage 3 jet kit \*/ Factory Pro shift kit \*/ Full V&H SS exhaust
Custom '02 R6 undertail \*/ YZF gas tank \*/ Raised via dogbones \*/ custom flush turnsignals
Full R6 brake set-up \*/ SS lines \*/ Progressive fork springs \*/ ZX2 coilpack


ADD YOURSELF TO THE OFFICIAL FZRONLINE GOOGLE EARTH MAP :bunny :banjoman
Top
User avatar
95FZR600
2000+ Posts
2000+ Posts
Posts: 2972
Joined: Sat May 31, 2008 10:41 pm
Location: Kennesaw, Georgia

Re: Rear sets

Post by 95FZR600 »

I was thinking maybe an earlier year. The holes dont have to be close dpending on he bracket.
2002 Yamaha R6-----2003 Yamaha R6

Image
Top
User avatar
shredex
2000+ Posts
2000+ Posts
Posts: 2768
Joined: Sun Sep 07, 2008 10:40 am
Location: Holiday, Florida
Contact:
Contact shredex

Re: Rear sets

Post by shredex »

megaloxana wrote:I have an '05 R6 shift side stock rearset and the linkage doesn't come close to being able to be used. The bolts holes aren't close either.
yea, there is about a inch difference...but a custom bracket like i have shown on the previous page solves everything
Image
Top
User avatar
95FZR600
2000+ Posts
2000+ Posts
Posts: 2972
Joined: Sat May 31, 2008 10:41 pm
Location: Kennesaw, Georgia

Re: Rear sets

Post by 95FZR600 »

Thats what we need, "Custom One Off Bracket".
2002 Yamaha R6-----2003 Yamaha R6

Image
Top
User avatar
shredex
2000+ Posts
2000+ Posts
Posts: 2768
Joined: Sun Sep 07, 2008 10:40 am
Location: Holiday, Florida
Contact:
Contact shredex

Re: Rear sets

Post by shredex »

95FZR600 wrote:Thats what we need, "Custom One Off Bracket".

yup :thumbsup:

I will probably do this swap in the future as well.
I like that one dudes racinf fzr rear sets, but I dont need that fancy...lol
Image
Top
User avatar
Dragon
Level 2.5
Level 2.5
Posts: 283
Joined: Sun May 18, 2008 10:04 pm
Location: St. Paul, Minnesota

Re: Rear sets

Post by Dragon »

So, I just scored a universal set up. :banana:
What you think guys?


http://i60.photobucket.com/albums/h15/n ... 1226912497


All I need now is some brackets to mount them, anyone have access to a mill?
Pm me if you could help me out, and I'll give the dimensions I need for the brackets.
I'll try and figure out the shift linkage deal when they arrive, something got to work.
I'll start a new thread with the installation. Still got other parts to swap out also, but this :swear snow & cold weather got me not wanting to touch the fizz yet. Maybe I'll start when I get the rear sets. LOL2
Image
Top
User avatar
megaloxana
2000+ Posts
2000+ Posts
Posts: 2282
Joined: Thu May 15, 2008 5:05 pm
Location: Hanover, PA 17331
Contact:
Contact megaloxana

Re: Rear sets

Post by megaloxana »

shredex wrote:
megaloxana wrote:I have an '05 R6 shift side stock rearset and the linkage doesn't come close to being able to be used. The bolts holes aren't close either.
yea, there is about a inch difference...but a custom bracket like i have shown on the previous page solves everything
this may solve it on the right side, but not the left side. The problem is the linkage connects above the lever. If you could flip the linkage upside down, then it would probably work or maybe if you could adapt the fzr lever onto the r6 rearset.
'92 FZR 600
Airtech R1 kit \*/ 520 conversion \*/ 14F-47R gearing
K&N pod filters \*/ Stage 3 jet kit \*/ Factory Pro shift kit \*/ Full V&H SS exhaust
Custom '02 R6 undertail \*/ YZF gas tank \*/ Raised via dogbones \*/ custom flush turnsignals
Full R6 brake set-up \*/ SS lines \*/ Progressive fork springs \*/ ZX2 coilpack


ADD YOURSELF TO THE OFFICIAL FZRONLINE GOOGLE EARTH MAP :bunny :banjoman
Top
User avatar
shredex
2000+ Posts
2000+ Posts
Posts: 2768
Joined: Sun Sep 07, 2008 10:40 am
Location: Holiday, Florida
Contact:
Contact shredex

Re: Rear sets

Post by shredex »

megaloxana wrote:
shredex wrote:
megaloxana wrote:I have an '05 R6 shift side stock rearset and the linkage doesn't come close to being able to be used. The bolts holes aren't close either.
yea, there is about a inch difference...but a custom bracket like i have shown on the previous page solves everything
this may solve it on the right side, but not the left side. The problem is the linkage connects above the lever. If you could flip the linkage upside down, then it would probably work or maybe if you could adapt the fzr lever onto the r6 rearset.
idk. talk to tlc2cann and find out what he did
Image
Top
Post Reply

Return to “FZR600”