good news! (PICS added)
Moderators: Site Director, FZR Forum Moderators
- shredex
- 2000+ Posts

- Posts: 2768
- Joined: Sun Sep 07, 2008 10:40 am
- Location: Holiday, Florida
- Contact:
good news! (PICS added)
the guy that has the 04-06 r1 forks with lower tree/stem/fender/wheel/calipers/ and rear wheel is going to trade me all the stuff for my home gym!
now I need controls/front master/clutch/left clip-on/top tree/and new front tire...(current tire on the wheel is dry rotted from sitting to long)
I offered the trade and showed him my criagslist ad and he accepted!
http://tampa.craigslist.org/psc/spo/968583778.html
but there gold 04-06 r1 forks.
now I need the left clip-on and clutch purch
now I need controls/front master/clutch/left clip-on/top tree/and new front tire...(current tire on the wheel is dry rotted from sitting to long)
I offered the trade and showed him my criagslist ad and he accepted!
http://tampa.craigslist.org/psc/spo/968583778.html
but there gold 04-06 r1 forks.
now I need the left clip-on and clutch purch
Last edited by shredex on Fri Dec 26, 2008 8:16 am, edited 2 times in total.

- ragedigital
- 4000+ Posts

- Posts: 4153
- Joined: Wed May 07, 2008 9:30 am
- Location: Northwest St. Louis
Re: good news!
Good deal! We didn't get anything but $25 for our Home Gym and it was very similar to yours...
As a matter of fact, I'll never buy new again. So many people, like my wife, have the best intentions on using their equipment but never do.
As a matter of fact, I'll never buy new again. So many people, like my wife, have the best intentions on using their equipment but never do.
Thanks for joining and participating in the most "active" FZR Community on the internet!
- shredex
- 2000+ Posts

- Posts: 2768
- Joined: Sun Sep 07, 2008 10:40 am
- Location: Holiday, Florida
- Contact:
Re: good news!
yea, I know...you have to pay like $1k new and then you can only get like $100 out of it...ragedigital wrote:Good deal! We didn't get anything but $25 for our Home Gym and it was very similar to yours...
As a matter of fact, I'll never buy new again. So many people, like my wife, have the best intentions on using their equipment but never do.
its like that with those big screen tv's...Iv always wanted them and I find them for $50 now....sometimes free.
I was just so happy when this email arrived
"hey this is *****. I would be willing to do the trade for the home gym. Are you going to be able to drop off and pick up?"
(I kept name anonymous...dont know why I did)

- megaloxana
- 2000+ Posts

- Posts: 2282
- Joined: Thu May 15, 2008 5:05 pm
- Location: Hanover, PA 17331
- Contact:
Re: good news!
damn nice trade
'92 FZR 600
Airtech R1 kit \*/ 520 conversion \*/ 14F-47R gearing
K&N pod filters \*/ Stage 3 jet kit \*/ Factory Pro shift kit \*/ Full V&H SS exhaust
Custom '02 R6 undertail \*/ YZF gas tank \*/ Raised via dogbones \*/ custom flush turnsignals
Full R6 brake set-up \*/ SS lines \*/ Progressive fork springs \*/ ZX2 coilpack
ADD YOURSELF TO THE OFFICIAL FZRONLINE GOOGLE EARTH MAP

Airtech R1 kit \*/ 520 conversion \*/ 14F-47R gearing
K&N pod filters \*/ Stage 3 jet kit \*/ Factory Pro shift kit \*/ Full V&H SS exhaust
Custom '02 R6 undertail \*/ YZF gas tank \*/ Raised via dogbones \*/ custom flush turnsignals
Full R6 brake set-up \*/ SS lines \*/ Progressive fork springs \*/ ZX2 coilpack
ADD YOURSELF TO THE OFFICIAL FZRONLINE GOOGLE EARTH MAP
- mike94fzr600
- Level 4.5

- Posts: 499
- Joined: Thu Jul 24, 2008 11:38 pm
- Location: waterford mi
Re: good news!
Good deal now go drop it off and get to work
my rides
2000 chevy z71 4x4
1993 Suzuki Samurai my mud \ trail toy
1994 fzr 600
2000 chevy z71 4x4
1993 Suzuki Samurai my mud \ trail toy
1994 fzr 600
Re: good news!
Great deal! Post some pics when it arrives to the Shredex house.
- shredex
- 2000+ Posts

- Posts: 2768
- Joined: Sun Sep 07, 2008 10:40 am
- Location: Holiday, Florida
- Contact:
Re: good news!
Iv had the gym for about 10 years now...and barly used the damn thing...
I think the forks will do me much better
I think the forks will do me much better

Re: good news!
Ok so now sell off some more shit and see about the YZF you were looking at.
Duane...
Bike:
1994 Yamaha FZR 1000 EXUP
Factory Pro Stage 1 Jetting | K&N Filter | Corbin Seat | ProTek Keyless Gas Cap | GSXR Mirrors
My Thread
Cage:
2005 Saab 9-7x 5.3i Arc AWD

THE WIKI IS YOUR FRIEND
THE SEARCH IS YOUR SIGNIFICANT OTHER
USE THEM!!
Bike:
1994 Yamaha FZR 1000 EXUP
Factory Pro Stage 1 Jetting | K&N Filter | Corbin Seat | ProTek Keyless Gas Cap | GSXR Mirrors
My Thread
Cage:
2005 Saab 9-7x 5.3i Arc AWD

THE WIKI IS YOUR FRIEND
THE SEARCH IS YOUR SIGNIFICANT OTHER
USE THEM!!
- shredex
- 2000+ Posts

- Posts: 2768
- Joined: Sun Sep 07, 2008 10:40 am
- Location: Holiday, Florida
- Contact:
Re: good news!
sweekster wrote:Ok so now sell off some more shit and see about the YZF you were looking at.
I have nothing of any value....
I can sell myself of the corner for a month or two...

- shredex
- 2000+ Posts

- Posts: 2768
- Joined: Sun Sep 07, 2008 10:40 am
- Location: Holiday, Florida
- Contact:
Re: good news! (PICS added)
here is what im getting


rear rim too


clutch and brake (aftermarket I think)



rear rim too


clutch and brake (aftermarket I think)


Re: good news! (PICS added)
Nice! You going to get modking to make you a triple?
- shredex
- 2000+ Posts

- Posts: 2768
- Joined: Sun Sep 07, 2008 10:40 am
- Location: Holiday, Florida
- Contact:
Re: good news! (PICS added)
If I had the money I would....95FZR600 wrote:Nice! You going to get modking to make you a triple?
but I think im just going to do it the other way and weld it and turn it down on a lathe

Re: good news! (PICS added)
Shreddex - Look at this thread. viewtopic.php?f=30&t=1674 It might be easier that welding and laith work. Good trade on the parts.
Yes, that is a Single Sided Swingarm FZR600 that I built.
Something is lurking, waiting, wanting to be built......It calls to me from the darkness....
I can finally see the light at the end of the tunnel....Then I realize that it is the train coming to run my ass over....
Something is lurking, waiting, wanting to be built......It calls to me from the darkness....
I can finally see the light at the end of the tunnel....Then I realize that it is the train coming to run my ass over....
- slayermd
- Level 5.0

- Posts: 521
- Joined: Sat Aug 09, 2008 3:20 pm
- Location: Westminster Colorado
- Contact:
Re: good news! (PICS added)
Does anyone know what he charges for the lower triple?95FZR600 wrote:Nice! You going to get modking to make you a triple?
And shredex, nice pick up but......QUIT COPYING ME!!!!!! JK. I picked up a R6 front wheel w/rotors for cheap so Ill be starting my R1 fork swap soon. We can give each other pointers.
- shredex
- 2000+ Posts

- Posts: 2768
- Joined: Sun Sep 07, 2008 10:40 am
- Location: Holiday, Florida
- Contact:
Re: good news! (PICS added)
slayermd wrote:Does anyone know what he charges for the lower triple?95FZR600 wrote:Nice! You going to get modking to make you a triple?
And shredex, nice pick up but......QUIT COPYING ME!!!!!! JK. I picked up a R6 front wheel w/rotors for cheap so Ill be starting my R1 fork swap soon. We can give each other pointers.
and no clue what he charges...he has only made one for freeze and gave him a good deal on it....
youll have to pm modking himself and ask.
but he needs the stock lower tripple to make the new one...


