What you guys think?

slayermd · Post by **slayermd** » Wed Dec 24, 2008 3:42 pm

It does stick out a bit but its nothing too bad.

I still need to do the lowers too.
*Those forks look like twigs.*

shredex · Post by **shredex** » Wed Dec 24, 2008 6:34 pm

gorgeous...
only one pic is working.

megaloxana · Post by **megaloxana** » Wed Dec 24, 2008 11:30 pm

it doesn't look too bad. Actually I kinda like it. Do you have a side pic?

slayermd · Post by **slayermd** » Thu Dec 25, 2008 1:20 am

I'll get a good pic of both upper and lower's tomorrow. The upper wont stick out as far either and will be better placed.

shredex · Post by **shredex** » Thu Dec 25, 2008 10:23 am

how is the stay mounted?

mike94fzr600 · Post by **mike94fzr600** » Thu Dec 25, 2008 3:55 pm

looks good

Post by **sweekster** » Thu Dec 25, 2008 5:32 pm

That's shaping up to be a nice track burner there bud. Keep us updated please...

slayermd · Post by **slayermd** » Fri Dec 26, 2008 8:09 pm

I got the final position on the upper fairing and its bolted on the fairing stay. So far everything has been just awesome as far as getting the R1 fairings to mate up with the FZR. On these pics I have the lowers held up by a box so thats why their off a bit.

The steering damper fits perfect!

This is the angle I am using for the fairing stay. I have to cut a piece of metal to make it stay that way.

shredex · Post by **shredex** » Sat Dec 27, 2008 12:03 am

the fzr400 stay mount is centered!!!!!
WTF!!!!

my 600 frame stay mount is off set!
thats whats holding me back so much on this project!

slayermd · Post by **slayermd** » Sun Dec 28, 2008 4:21 pm

95FZR600 wrote:Very nice job! Looking more and more like a race bike now.

Your exhaust can mounts right to the header with no mid pipe? What headers are you running and what year and model can is that from?

Thank you!

The exhaust is a 2000 R6 and the pipe is from a 2007 R6 (not the S model). I had to widen the diameter of the header for the pipe to fit it. It sounds like my last FZR when I had the stock R6 shorty pipe on it.

slayermd · Post by **slayermd** » Sat Jan 10, 2009 8:59 pm

I put the windscreen on and it kinda raised the nose a bit. But is it too high?

slayermd · Post by **slayermd** » Sat Jan 10, 2009 9:36 pm

Fixed.

manveru · Post by **manveru** » Sun Jan 11, 2009 4:25 am

i bet it won't look as high with a front fender on it.

shredex · Post by **shredex** » Sun Jan 11, 2009 11:45 am

if your doing a fork swap then leave it because the front will drop about 2" with usd forks.

and yes, it wont look as high with the fender on.

yamaha_george · Post by **yamaha_george** » Sun Jan 11, 2009 12:39 pm

The only way to know if it is too high is to get into the bubble as though in racing mode and see if your helmet fits and you can actually see. Then try it on the donor style bike and see the difference.

FZRSupport: the FZROnline Archive

What you guys think?

What you guys think?

Re: What you guys think?

Re: What you guys think?

Re: What you guys think?

Re: What you guys think?

Re: What you guys think?

Re: What you guys think?

Re: What you guys think?

Re: What you guys think?

Re: What you guys think?

Re: What you guys think?

Re: What you guys think?

Re: What you guys think?

Re: What you guys think?

Re: What you guys think?