wierd oil leak maybe?
Moderators: Site Director, FZR Forum Moderators
- deathcomesarippin
- Site Newbie
- Posts: 40
- Joined: Mon Dec 01, 2008 6:20 pm
- Location: gods waiting room (florida)
wierd oil leak maybe?
I have noticed on the right plastic underneath the driver seat looking from the back of the bike some kind of liquid that looks like it is being sprayed on, I checked the brake fluid and oil levels and both are good, im guessing maybe its a little bit of oil being sprayed out at a time but I odnt know where from. ill get some pictures soon to make this easier
modded air box,
K&N drop in,
race tech fork springs,
R6 header-kerker exhuast,
things to come, 520 conversion, jet kit, yzf front brake calibers
K&N drop in,
race tech fork springs,
R6 header-kerker exhuast,
things to come, 520 conversion, jet kit, yzf front brake calibers
- shredex
- 2000+ Posts
- Posts: 2768
- Joined: Sun Sep 07, 2008 10:40 am
- Location: Holiday, Florida
- Contact:
Re: wierd oil leak maybe?
finally another one from florida!!!
anyways...Im guessing its a oil leak also...check where all the seals are that contain oil. (both right side engine covers, head gaskets)
could also be coolant coming from a hole in the hose...
one way to test your radiator hose is to turn your bike on and rev it to a high rpm and if theres a hole then coolant will be sprayed out of it...
anyways...Im guessing its a oil leak also...check where all the seals are that contain oil. (both right side engine covers, head gaskets)
could also be coolant coming from a hole in the hose...
one way to test your radiator hose is to turn your bike on and rev it to a high rpm and if theres a hole then coolant will be sprayed out of it...

- deathcomesarippin
- Site Newbie
- Posts: 40
- Joined: Mon Dec 01, 2008 6:20 pm
- Location: gods waiting room (florida)
Re: wierd oil leak maybe?
ok will do first thing tomorrow I replaced the valve cover gasket about a month ago but ill still check it out to, thanks
modded air box,
K&N drop in,
race tech fork springs,
R6 header-kerker exhuast,
things to come, 520 conversion, jet kit, yzf front brake calibers
K&N drop in,
race tech fork springs,
R6 header-kerker exhuast,
things to come, 520 conversion, jet kit, yzf front brake calibers
- shredex
- 2000+ Posts
- Posts: 2768
- Joined: Sun Sep 07, 2008 10:40 am
- Location: Holiday, Florida
- Contact:
Re: wierd oil leak maybe?
yes, but it will still leak if not tightened up enoughdeathcomesarippin wrote:ok will do first thing tomorrow I replaced the valve cover gasket about a month ago but ill still check it out to, thanks

what part of FL you live in???

Re: wierd oil leak maybe?
Fork seal
http://www.michiganmobileservice.com/

“A common mistake that people make when trying to design something completely foolproof is to underestimate the ingenuity of complete fools.”-Douglas Adams
http://www.youtube.com/user/reelrazor
“A common mistake that people make when trying to design something completely foolproof is to underestimate the ingenuity of complete fools.”-Douglas Adams
http://www.youtube.com/user/reelrazor
- deathcomesarippin
- Site Newbie
- Posts: 40
- Joined: Mon Dec 01, 2008 6:20 pm
- Location: gods waiting room (florida)
Re: wierd oil leak maybe?
nah its not a fork seal I looked at it today and it was the head gasket so I took it off and put more sealant on it i hope this should work, but I live in plant city close to tampa
modded air box,
K&N drop in,
race tech fork springs,
R6 header-kerker exhuast,
things to come, 520 conversion, jet kit, yzf front brake calibers
K&N drop in,
race tech fork springs,
R6 header-kerker exhuast,
things to come, 520 conversion, jet kit, yzf front brake calibers
- shredex
- 2000+ Posts
- Posts: 2768
- Joined: Sun Sep 07, 2008 10:40 am
- Location: Holiday, Florida
- Contact:
Re: wierd oil leak maybe?
just make sure you tighten them enough.deathcomesarippin wrote:nah its not a fork seal I looked at it today and it was the head gasket so I took it off and put more sealant on it i hope this should work, but I live in plant city close to tampa
they have a spacer that will allow you to tighten it without overtightening it...
tampa is close to me
