George,
Rad guard fitted, FZ600 fairing on, Goodridge in place...
Next is to fit the remaining front indicator, mirrors, and the alloy FZR1000 rear brake torque arm and she's done.
Calling Yamaha George
Moderators: Site Director, FZR Forum Moderators
- ragedigital
- 4000+ Posts
- Posts: 4153
- Joined: Wed May 07, 2008 9:30 am
- Location: Northwest St. Louis
Re: Calling Yamaha George
Very nice! I wanted to see a photo of that attached...
Thanks for joining and participating in the most "active" FZR Community on the internet!
Re: Calling Yamaha George
It was an easy fit, though the clutch lever fouls fractionally on full right lock. It's a bit more compact & less bulky than the FZR fairing, and doesn't have vents or anything, and i didn't need to worry about infil panels and the like either. Plus it was cheap!
Re: Calling Yamaha George
Very cool, you've got a nice looking setup there FB.
Re: Calling Yamaha George
Less talk..More Pics
Duane...
Bike:
1994 Yamaha FZR 1000 EXUP
Factory Pro Stage 1 Jetting | K&N Filter | Corbin Seat | ProTek Keyless Gas Cap | GSXR Mirrors
My Thread
Cage:
2005 Saab 9-7x 5.3i Arc AWD
THE WIKI IS YOUR FRIEND
THE SEARCH IS YOUR SIGNIFICANT OTHER
USE THEM!!
Bike:
1994 Yamaha FZR 1000 EXUP
Factory Pro Stage 1 Jetting | K&N Filter | Corbin Seat | ProTek Keyless Gas Cap | GSXR Mirrors
My Thread
Cage:
2005 Saab 9-7x 5.3i Arc AWD
THE WIKI IS YOUR FRIEND
THE SEARCH IS YOUR SIGNIFICANT OTHER
USE THEM!!
Re: Calling Yamaha George
More pics soon. Just a little more work to do first.
-
- 5000+ Posts
- Posts: 5853
- Joined: Fri May 09, 2008 8:46 am
- Location: west london UK
Re: Calling Yamaha George
Thanks FB, it looks better on yours than mine, have to go polish it some more !Fartblood wrote:More pics soon. Just a little more work to do first.
I still have a couple from the second batch left for those who want a Rad guard like that
- ragedigital
- 4000+ Posts
- Posts: 4153
- Joined: Wed May 07, 2008 9:30 am
- Location: Northwest St. Louis
Re: Calling Yamaha George
I also have one that George donated to FZROnline.com for a Giveaway...
They are very nice!
darrin
They are very nice!
darrin
Thanks for joining and participating in the most "active" FZR Community on the internet!
- the_finch
- Level 8.5
- Posts: 882
- Joined: Tue Jun 03, 2008 8:06 pm
- Location: Midland City, AL / UAHuntsville, Huntsville, AL
Re: Calling Yamaha George
Looking good. Definitely a new take on restyling the FZR600 front. Radiator guard is really shiny. Be sure to post pics as you get it finished, as we're all curious to see how she looks when she's done.
1997 FZR600RJ
Engine: K&N Drop-in air filter - stock airbox - FP 5°ignition advancer - EBC "Street Racer" Kevlar clutch
Exhaust: Stock header - Yoshimura RS-3 Carbon fiber slip-on
Body: Original paint/graphics - Clear Alternatives integrated LED Taillight - Flanders' flush front signals - YZF600 Mirrors - Comp. Werkes Stainless fender eliminator/tag bracket - 60w/55w H4 headlights
Tires: Metzler MEZ4B 120/70 ZR17 Front - Michelin Madacam 100x 150/70 ZR18 Rear
Brakes:Stock rotors with EBC HH Sinstered pads
In the works: YZF600 header, '97 Bandit 600 rear wheel, DynoJet Stage 3, Racetech Springs and Emulators fork rebuild, FZ1 rear shock, YZF600 front MC, Galfer SS Lines, CFM rearsets