A small visit to the hospital...

Any topic relating to the FZR/YZF (UK) or motorcycling in general.

Moderators: Site Director, FZR Forum Moderators

Post Reply
94fzr600convert
50+ Posts
50+ Posts
Posts: 61
Joined: Fri May 09, 2008 1:28 am
Location: Buffalo, NY
Contact:
Contact 94fzr600convert

Re: A small visit to the hospital...

Post by 94fzr600convert »

pretty sure one of the crafty vetssss here already brought over the basic blueprints for a cage from the archives... little help with a link??
Image

'94 FZR600

(Light) MODS:

Vance and Hines SSR2 Slip-on
Airtech R1 Body Conversion
Top
User avatar
the_finch
Level 8.5
Level 8.5
Posts: 882
Joined: Tue Jun 03, 2008 8:06 pm
Location: Midland City, AL / UAHuntsville, Huntsville, AL

Re: A small visit to the hospital...

Post by the_finch »

94fzr600convert wrote:pretty sure one of the crafty vetssss here already brought over the basic blueprints for a cage from the archives... little help with a link??
Actually, I drew up blueprints on them a month or so ago....posting link now.
Image
1997 FZR600RJ

Engine: K&N Drop-in air filter - stock airbox - FP 5°ignition advancer - EBC "Street Racer" Kevlar clutch
Exhaust: Stock header - Yoshimura RS-3 Carbon fiber slip-on
Body: Original paint/graphics - Clear Alternatives integrated LED Taillight - Flanders' flush front signals - YZF600 Mirrors - Comp. Werkes Stainless fender eliminator/tag bracket - 60w/55w H4 headlights
Tires: Metzler MEZ4B 120/70 ZR17 Front - Michelin Madacam 100x 150/70 ZR18 Rear
Brakes:Stock rotors with EBC HH Sinstered pads
In the works: YZF600 header, '97 Bandit 600 rear wheel, DynoJet Stage 3, Racetech Springs and Emulators fork rebuild, FZ1 rear shock, YZF600 front MC, Galfer SS Lines, CFM rearsets
Top
User avatar
the_finch
Level 8.5
Level 8.5
Posts: 882
Joined: Tue Jun 03, 2008 8:06 pm
Location: Midland City, AL / UAHuntsville, Huntsville, AL

Re: A small visit to the hospital...

Post by the_finch »

Here's the link to the frame slider thread. If you need clarification, I can hand-draw some better ones and upload them a little later on. You'd probably have to buy a spare set of engine bars and have someone like thatkid weld it up for you.

viewtopic.php?f=42&t=941
Image
1997 FZR600RJ

Engine: K&N Drop-in air filter - stock airbox - FP 5°ignition advancer - EBC "Street Racer" Kevlar clutch
Exhaust: Stock header - Yoshimura RS-3 Carbon fiber slip-on
Body: Original paint/graphics - Clear Alternatives integrated LED Taillight - Flanders' flush front signals - YZF600 Mirrors - Comp. Werkes Stainless fender eliminator/tag bracket - 60w/55w H4 headlights
Tires: Metzler MEZ4B 120/70 ZR17 Front - Michelin Madacam 100x 150/70 ZR18 Rear
Brakes:Stock rotors with EBC HH Sinstered pads
In the works: YZF600 header, '97 Bandit 600 rear wheel, DynoJet Stage 3, Racetech Springs and Emulators fork rebuild, FZ1 rear shock, YZF600 front MC, Galfer SS Lines, CFM rearsets
Top
User avatar
WNY ROGO
Level 2.5
Level 2.5
Posts: 251
Joined: Mon Dec 01, 2008 1:21 pm
Location: 716 Buffalo Ny
Contact:
Contact WNY ROGO

Re: A small visit to the hospital...

Post by WNY ROGO »

Ahhhh the good ole m-a-c center. My personal favorite.
...ROGO...
1993 Yamaha Fzr 600-RIP
Stock

1990 Yamaha Fzr 600-Current
Mods
Updated R6 Voltage Regulator/Rectifier
Flush mount Front Signals
R6 Headers Modded By That-Kid
Leo Vince R6 Highmount Exhaust
520 Chain and Sprocket Conversion
YZF600R Front End Swap
Front and Rear YZF600R Brake Swap
YZF600R Swingarm Swap
92 Fzr Single Upper
8000k HID Headlight Kit
95 YZF600R Gauge Cluster
02 R6 Tail, Fender Eliminator and Intergrated Tailight
YZF600R Gas Tank
Rear Tire Hugger

http://www.myspace.com/rogo420
facebook---Andrew Rogo Rogowski
Fzr Forum===WnyRogo93Fzr
Top
Post Reply

Return to “General Discussion”