lifting
Moderators: Site Director, FZR Forum Moderators
-
DEMORAL1ZE
- 100+ Posts
- Posts: 141
- Joined: Mon Oct 13, 2008 10:32 am
- Location: SOUTHEAST MISSOURI--------LAND OF THE FREE, HOME OF THE BRAVE
lifting
i am preparing to remove the front and rear wheel on my 1993 fzr600. I have a swingarm jack for the rear but would like suggestions for lifting the front. Any help would be appreciated. THANX.......DEMO...
YOU CAN TWIST PERCEPTION BUT REALITY WON'T BUDGE
Re: lifting
i used a rachet strap hand from my rafter in my garage ,just wrapped it around the neck or front of the frame from under the triples .. i didnt trust tryin to use the triples because i was worried ill bend or tweak somthing on the front end ..
2002 R1 9k miles , Hotbodies undertail , Chopped Hindle Hi Mount , Solo Seat cowl,Frame sliders, little yellow yamaha wheel stickers .hehe
94' 600RR SOLD**
hid xenon
airtek solo tail
time for a 1000
R.I.P DaD 2/17/09 Your in my <3 always
-
Fizzinatorr
- Level 6.5
- Posts: 662
- Joined: Fri May 30, 2008 5:05 pm
- Location: Middle of NJ
Re: lifting
stands are the safest way to go, you can get cheap ones on ebay that will do the job
or ratchet (and pray)
or ratchet (and pray)
8 Bikes so far...more coming too...
Finished my 2000 GSXR 750 -> Link here viewtopic.php?f=68&t=3617
Finished my 2000 GSXR 750 -> Link here viewtopic.php?f=68&t=3617
Re: lifting
Go to Harbor Freight and buy a lift. For $300 bucks you cant go wrong.
2002 Yamaha R6-----2003 Yamaha R6
-
megaloxana
- 2000+ Posts
- Posts: 2282
- Joined: Thu May 15, 2008 5:05 pm
- Location: Hanover, PA 17331
- Contact:
Re: lifting
eeeek ill still stick to my front and rear stands. I'm cheap maybe?95FZR600 wrote:Go to Harbor Freight and buy a lift. For $300 bucks you cant go wrong.
'92 FZR 600
Airtech R1 kit \*/ 520 conversion \*/ 14F-47R gearing
K&N pod filters \*/ Stage 3 jet kit \*/ Factory Pro shift kit \*/ Full V&H SS exhaust
Custom '02 R6 undertail \*/ YZF gas tank \*/ Raised via dogbones \*/ custom flush turnsignals
Full R6 brake set-up \*/ SS lines \*/ Progressive fork springs \*/ ZX2 coilpack
ADD YOURSELF TO THE OFFICIAL FZRONLINE GOOGLE EARTH MAP
Airtech R1 kit \*/ 520 conversion \*/ 14F-47R gearing
K&N pod filters \*/ Stage 3 jet kit \*/ Factory Pro shift kit \*/ Full V&H SS exhaust
Custom '02 R6 undertail \*/ YZF gas tank \*/ Raised via dogbones \*/ custom flush turnsignals
Full R6 brake set-up \*/ SS lines \*/ Progressive fork springs \*/ ZX2 coilpack
ADD YOURSELF TO THE OFFICIAL FZRONLINE GOOGLE EARTH MAP
Re: lifting
megaloxana wrote:eeeek ill still stick to my front and rear stands. I'm cheap maybe?95FZR600 wrote:Go to Harbor Freight and buy a lift. For $300 bucks you cant go wrong.
I could not live without one. But then again, I have more bikes than you.
2002 Yamaha R6-----2003 Yamaha R6