whats the specs on the 89' fzr rear wheel???

FZR600 Forum

Moderators: Site Director, FZR Forum Moderators

Post Reply
User avatar
shredex
2000+ Posts
2000+ Posts
Posts: 2768
Joined: Sun Sep 07, 2008 10:40 am
Location: Holiday, Florida
Contact:

whats the specs on the 89' fzr rear wheel???

Post by shredex »

I went riding hard today, toping out my damn bike tryin to keep up with an r6 and a 750 gsxr.
well, anyways, I noticed my bike wobbling a little and not being stable when I was taking turns at all.
when I got to this big biker meet that really far away, some guy told me my rear wheel was flat!
FUDGE!!!
no one had a pump. I found out that there was a big hole in my rear wheel where I mut have hit a nail or something.
I was completly broke.
I duct taped the wheel and road all the way back home carefully.


so I need to replace my rear wheel, but I dont know what I need to get. any help?
Image
User avatar
the_finch
Level 8.5
Level 8.5
Posts: 882
Joined: Tue Jun 03, 2008 8:06 pm
Location: Midland City, AL / UAHuntsville, Huntsville, AL

Re: whats the specs on the 89' fzr rear wheel???

Post by the_finch »

Shredex,

Both the 89-90 and 91-99 rear wheel are 18" wheels. The only difference is in the fact that in 89-90, the 600 had an old school box swingarm and a 3.5" rear wheel. In 91+, they went to the beefier deltabox swinger and a 4" wide rear wheel. If I'm not mistaken, you have a '92 foxeye, right? You would have the deltabox swingarm and need the 18x4" 1991+ rear rim. The good news is that both PIMPMYFZR and thatkid have spare rear wheels for sale, and you should easily be able to get them cheaper than eBay, while helping out fellow FZR enthusiasts. :thumbsup:
Image
1997 FZR600RJ

Engine: K&N Drop-in air filter - stock airbox - FP 5°ignition advancer - EBC "Street Racer" Kevlar clutch
Exhaust: Stock header - Yoshimura RS-3 Carbon fiber slip-on
Body: Original paint/graphics - Clear Alternatives integrated LED Taillight - Flanders' flush front signals - YZF600 Mirrors - Comp. Werkes Stainless fender eliminator/tag bracket - 60w/55w H4 headlights
Tires: Metzler MEZ4B 120/70 ZR17 Front - Michelin Madacam 100x 150/70 ZR18 Rear
Brakes:Stock rotors with EBC HH Sinstered pads
In the works: YZF600 header, '97 Bandit 600 rear wheel, DynoJet Stage 3, Racetech Springs and Emulators fork rebuild, FZ1 rear shock, YZF600 front MC, Galfer SS Lines, CFM rearsets
yamaha_george
5000+ Posts
5000+ Posts
Posts: 5853
Joined: Fri May 09, 2008 8:46 am
Location: west london UK

Re: whats the specs on the 89' fzr rear wheel???

Post by yamaha_george »

shredex wrote:when I got to this big biker meet that really far away, some guy told me my rear wheel was flat!
FUDGE!!!

I duct taped the wheel and road all the way back home carefully.


so I need to replace my rear wheel, but I dont know what I need to get. any help?
Shredex,
will you stop copying me next you will tell us you broke your wrist LOL2 jk

Pity you are not here I would happily sell you my tyre (less than 5 miles on it ) or the complete wheel if you wanted just a slide out jobby.

My 17" rim arrived the day after the F'ing tyre was fitted :swear

Please do not break yer wrist ridding on duct tape
User avatar
shredex
2000+ Posts
2000+ Posts
Posts: 2768
Joined: Sun Sep 07, 2008 10:40 am
Location: Holiday, Florida
Contact:

Re: whats the specs on the 89' fzr rear wheel???

Post by shredex »

the_finch wrote:Shredex,

Both the 89-90 and 91-99 rear wheel are 18" wheels. The only difference is in the fact that in 89-90, the 600 had an old school box swingarm and a 3.5" rear wheel. In 91+, they went to the beefier deltabox swinger and a 4" wide rear wheel. If I'm not mistaken, you have a '92 foxeye, right? You would have the deltabox swingarm and need the 18x4" 1991+ rear rim. The good news is that both PIMPMYFZR and thatkid have spare rear wheels for sale, and you should easily be able to get them cheaper than eBay, while helping out fellow FZR enthusiasts. :thumbsup:
I have a 92+ front headlamp, but the title says 89'.
I believe it was a swap.
but I have the old school swingarm.
Image
User avatar
cad600
1000+ Posts
1000+ Posts
Posts: 1413
Joined: Fri May 09, 2008 3:41 pm
Location: Atlanta, GA

Re: whats the specs on the 89' fzr rear wheel???

Post by cad600 »

Which model year you have doesn't matter. The only thing the really makes a difference is the rim itself. Take a look at it. You should see some raised letters that say 3.5x18 DOT or 4.0x18 DOT. Now get online or try your local cycle shop (not a dealer) and look for a Bridgestone BT14 (BT014) 150 60R18, buy it and have it mounted. Try buying from a place called CycleGear. They offer "Motogaurd" for the tires if they mount it. Cost like $15 but it's loke road hazzard insurance for the tire. The only reason I say look at the rim is so you know what you have. Some shops may say the 150 won't fit on a 3.5" rim. It will, but your at their mercy so node your head and say thanks anyway. It's nearly impossible to find a 140 tire any more and I think the Bridgestone is the only "High Performance" 18" tire still made.
Yes, that is a Single Sided Swingarm FZR600 that I built.

Something is lurking, waiting, wanting to be built......It calls to me from the darkness....

I can finally see the light at the end of the tunnel....Then I realize that it is the train coming to run my ass over....
sweekster
2000+ Posts
2000+ Posts
Posts: 2773
Joined: Tue May 13, 2008 10:52 am
Location: Perris, CA

Re: whats the specs on the 89' fzr rear wheel???

Post by sweekster »

Just to clarify. Do you want to replace your complete rear wheel or do you just need a new rear tire?
Duane...
Bike:
1994 Yamaha FZR 1000 EXUP
Factory Pro Stage 1 Jetting | K&N Filter | Corbin Seat | ProTek Keyless Gas Cap | GSXR Mirrors
My Thread
Cage:
2005 Saab 9-7x 5.3i Arc AWD

Image


THE WIKI IS YOUR FRIEND
THE SEARCH IS YOUR SIGNIFICANT OTHER
USE THEM!!
User avatar
the_finch
Level 8.5
Level 8.5
Posts: 882
Joined: Tue Jun 03, 2008 8:06 pm
Location: Midland City, AL / UAHuntsville, Huntsville, AL

Re: whats the specs on the 89' fzr rear wheel???

Post by the_finch »

Oops. My bad. I thought you were talking about the wheel itself, not the tire (or tyre for our users accross the pond :mrgreen: ).

AS far as Tyres go, the Shinko 006 Podium comes in a 150/60r18 as well and is supposed to be a pretty good tire. I was gonna try it out when I replace my tires next. The other option is sport touring tyres, since the bike is your main form of transportation. They don't provide quite as much grip, but they have alot better lifespan, so you won't have to replace them quite as often, saving money.
Image
1997 FZR600RJ

Engine: K&N Drop-in air filter - stock airbox - FP 5°ignition advancer - EBC "Street Racer" Kevlar clutch
Exhaust: Stock header - Yoshimura RS-3 Carbon fiber slip-on
Body: Original paint/graphics - Clear Alternatives integrated LED Taillight - Flanders' flush front signals - YZF600 Mirrors - Comp. Werkes Stainless fender eliminator/tag bracket - 60w/55w H4 headlights
Tires: Metzler MEZ4B 120/70 ZR17 Front - Michelin Madacam 100x 150/70 ZR18 Rear
Brakes:Stock rotors with EBC HH Sinstered pads
In the works: YZF600 header, '97 Bandit 600 rear wheel, DynoJet Stage 3, Racetech Springs and Emulators fork rebuild, FZ1 rear shock, YZF600 front MC, Galfer SS Lines, CFM rearsets
User avatar
ragedigital
4000+ Posts
4000+ Posts
Posts: 4153
Joined: Wed May 07, 2008 9:30 am
Location: Northwest St. Louis

Re: whats the specs on the 89' fzr rear wheel???

Post by ragedigital »

+1 on the BT-014. I did find that mine did sqaure off after 1500 miles. That's waht you get from highway miles.

Too bad they don't make the 150 in a BT-016 with the triple compound.

They do make a 160/60/18 for some reason. Anyone know what that is supposed to fit?
Thanks for joining and participating in the most "active" FZR Community on the internet!
thatkid
2000+ Posts
2000+ Posts
Posts: 2026
Joined: Sun May 18, 2008 1:25 am
Location: Chicago, IL
Contact:

Re: whats the specs on the 89' fzr rear wheel???

Post by thatkid »

I'll sell you my rim/tire/rotor/cush/etc for 120 shipped. Cheaper than you're going to be able to get a new tire mounted and balanced for. Tire has a lot of life left in it, rubber cush things are super tight, bearings are fine, and it's a 4" rim. You'll get the spacers with it. Plus it'll pretty much be bolt and go.
Image
Do YOU Scopper?

"When some people cry, it's not because they’re weak. It’s because they’ve been strong for far too long."
User avatar
shredex
2000+ Posts
2000+ Posts
Posts: 2768
Joined: Sun Sep 07, 2008 10:40 am
Location: Holiday, Florida
Contact:

Re: whats the specs on the 89' fzr rear wheel???

Post by shredex »

sweekster wrote:Just to clarify. Do you want to replace your complete rear wheel or do you just need a new rear tire?
well, I really just need the tire, but I could use a new rim because my bro pointed out that it was bent a little. I dont feel it when riding.
and I need a tire with grip because I like taking turns fast.


And my rim says 18xMT4.00 DOT
and my tire is a Dunlop 140/60 ZR18

im trying trying to stay cheap as im still pretty broke and I have dues to pay still.
Image
User avatar
shredex
2000+ Posts
2000+ Posts
Posts: 2768
Joined: Sun Sep 07, 2008 10:40 am
Location: Holiday, Florida
Contact:

Re: whats the specs on the 89' fzr rear wheel???

Post by shredex »

thatkid wrote:I'll sell you my rim/tire/rotor/cush/etc for 120 shipped. Cheaper than you're going to be able to get a new tire mounted and balanced for. Tire has a lot of life left in it, rubber cush things are super tight, bearings are fine, and it's a 4" rim. You'll get the spacers with it. Plus it'll pretty much be bolt and go.
Theres a guy on this forum that i might get the exact same thing from, but he is charging $90 shipped. :banana:
Image
User avatar
shredex
2000+ Posts
2000+ Posts
Posts: 2768
Joined: Sun Sep 07, 2008 10:40 am
Location: Holiday, Florida
Contact:

Re: whats the specs on the 89' fzr rear wheel???

Post by shredex »

i read that you can use a 150/60/18 which makes the bike more stable. appearantly.
Image
Post Reply