Need some measurements if anyone can help. R6/R1 stuff

[old_school]

1 1/8 inchies between the dots

[thatkid]

Still looking for a width measurement from inside edge to inside edge? Anyone? Helloooo? Please...

get it done this morning kid!

Doh! Ok, well that will verify the axle for newer R1 that I saw. What year is your R6? When you get a chance can you measure the width of the swingarm from inside edge to inside edge? My guess is it will be around 10.125" Just trying to get a few perspectives. Darrin's Suzuki is 10.25" with nothing inbetween and not tightened. Tommy's Honda is 10.125" tightened down. So if yours is right in there then I will be ok to go ahead with the next phase of this swap.

[abs929cbrrr]

my yzf600r swingarm had .250 of play from all the way tighend down with no wheel in it. ask somone on ebay for what ya need. i had a axle with all the spacer i just thru awau, i prob have notes yet of how wide the r6 shit is with all the spacers.

why do you need the measurement, swaping rims or swingarms?

[old_school]

02 R6