What are the normal Swaps....

blackeyesandbruises · Post by **blackeyesandbruises** » Thu Sep 18, 2008 4:18 pm

Done to a 1992 Fzr 1000, I know anything is possible with enough fab work but what are the typical things that I can do with minimal fab work to take my bike to the next level? Thanx for any info.

95FZR600 · Post by **95FZR600** » Thu Sep 18, 2008 4:20 pm

Anything is possible. What do you want to do?

blackeyesandbruises · Post by **blackeyesandbruises** » Thu Sep 18, 2008 5:38 pm

I know about the tail swap but I wanna do the front and side fairings but I dont know which ones work the best and arent a complete pain in the ass, and I got a line on a penske shock, but I heard there might be a swap for the swingarm and I dont really know much as far as giving it more horsepower.

blackeyesandbruises · Post by **blackeyesandbruises** » Thu Sep 18, 2008 5:43 pm

it seems that most of the swaps I find are for the 6oo?

Post by **haunter** » Thu Sep 18, 2008 6:05 pm

YZF750 swingarm has been done before

blackeyesandbruises · Post by **blackeyesandbruises** » Thu Sep 18, 2008 6:23 pm

Does it bolt right up?

cad600 · Post by **cad600** » Thu Sep 18, 2008 9:25 pm

The YZF750 swingarm should bolt up without too much problem. But unless your looking to get the "Braced" swingarm look, there is no point to it. Most people do a swingarm swap on the 600 to get a wider tire. The 1000 & 750 already has a wide tire. All fairing mods are going to be a pain in the ass. People do swap the tranny out of a 750 into the 1000 to get 6 gears instead of 5. Other than that, there is a big bore kit for performance. All other mods to a 1000 are pearly cosmetic. One guy in Germany (I think) put a Duc 916 swingarm, forks, and tail on his. Didn't look too complicated except for the custom subframe he made. What direction are you wanting to go in?

blackeyesandbruises · Post by **blackeyesandbruises** » Fri Sep 19, 2008 2:05 am

Just a Faster look and I have been thinking about trying a single sided swingarm.

cad600 · Post by **cad600** » Fri Sep 19, 2008 1:47 pm

Here is a link that should give you a bunch of ways to hurt your wallet.

http://www.motorcykelgalleri.dk/html/al ... bumID=2346

blackeyesandbruises · Sat Sep 20, 2008 12:15 am

My God after those pictures....im just moist...and Im spent....

Genesis · Post by **Genesis** » Sat Sep 20, 2008 12:29 am

A r1 front fairing and sides bolt up pretty well I'm in the middle of a r6 upper fairing swap right now and it has been pretty easy. go check out my thread or pm me if you have questions.

blackeyesandbruises · Post by **blackeyesandbruises** » Sun Sep 21, 2008 9:26 pm

Which thread is it, and do u got pics of it.

blackeyesandbruises · Post by **blackeyesandbruises** » Sun Sep 21, 2008 9:30 pm

Found it, sorry Im a little slow

95FZR600 · Post by **95FZR600** » Sun Sep 21, 2008 9:38 pm

Ill do the r6 swingarm swap for you if you do the r6 front fairing for me

blackeyesandbruises · Post by **blackeyesandbruises** » Wed Sep 24, 2008 1:54 pm

Sounds like a good deal I got the front fairings coming from ebay in a pretty sweet deal...very excited.

FZRSupport: the FZROnline Archive

What are the normal Swaps....

What are the normal Swaps....

Re: What are the normal Swaps....

Re: What are the normal Swaps....

Re: What are the normal Swaps....

Re: What are the normal Swaps....

Re: What are the normal Swaps....

Re: What are the normal Swaps....

Re: What are the normal Swaps....

Re: What are the normal Swaps....

Re: What are the normal Swaps....

Re: What are the normal Swaps....

Re: What are the normal Swaps....

Re: What are the normal Swaps....

Re: What are the normal Swaps....

Re: What are the normal Swaps....