Hey guys..
This sucks bad.. I got my K&N filter after a week and it's the wrong one. It's too tall for the airbox..The part# is YA6089.. Does anyone know what the correct one is for a 95 Yamaha FZR 600?? YA6092??
Thanks
K&N part #?
Moderators: Site Director, FZR Forum Moderators
K&N part #?
1995 ,FZR 600,Factory Pro 1.1Ti Jet Kit, Yoshi slipon,K&N filter,elevation 4200 ft above sea level.
Carb settings: Main Jet 110, Starter Jet 52.5,Needle @ 3rd position,23m Floats,about 3 turns IM Screws.
80's-90's,Rap..music.?? http://www.last.fm/listen/user/unsmenar/personal
Carb settings: Main Jet 110, Starter Jet 52.5,Needle @ 3rd position,23m Floats,about 3 turns IM Screws.
80's-90's,Rap..music.?? http://www.last.fm/listen/user/unsmenar/personal
Re: K&N part #?
YA6089 is the part number shown on K&N web site. I'm pretty sure that is what is in my stock air box. You might want to go back and look to see if there was anything blocking it from sitting down all the way.
Yes, that is a Single Sided Swingarm FZR600 that I built.
Something is lurking, waiting, wanting to be built......It calls to me from the darkness....
I can finally see the light at the end of the tunnel....Then I realize that it is the train coming to run my ass over....
Something is lurking, waiting, wanting to be built......It calls to me from the darkness....
I can finally see the light at the end of the tunnel....Then I realize that it is the train coming to run my ass over....
Re: K&N part #?
Okay thanks.. I pulled the specs for it and they managed to put the wrong filter in the right box.. ..Great , now I have to wait another week..cad600 wrote:YA6089 is the part number shown on K&N web site. I'm pretty sure that is what is in my stock air box. You might want to go back and look to see if there was anything blocking it from sitting down all the way.
1995 ,FZR 600,Factory Pro 1.1Ti Jet Kit, Yoshi slipon,K&N filter,elevation 4200 ft above sea level.
Carb settings: Main Jet 110, Starter Jet 52.5,Needle @ 3rd position,23m Floats,about 3 turns IM Screws.
80's-90's,Rap..music.?? http://www.last.fm/listen/user/unsmenar/personal
Carb settings: Main Jet 110, Starter Jet 52.5,Needle @ 3rd position,23m Floats,about 3 turns IM Screws.
80's-90's,Rap..music.?? http://www.last.fm/listen/user/unsmenar/personal