Coolant expansion/overflow tank location

[tatersalad314]

Hey fellas, my name is Jon. I just picked up a (what I believe to be) a '91 FZR 600.

My main question is where should the coolant expansion tank be located? A medicine bottle zip tied to the sub frame is taking its' place right now - not going to cut it with me. I have located an OEM on ebay http://www.ebay.com/itm/like/2623876270 ... rmvSB=true

I also downloaded a manual but fails to mention it anywhere, it also doesn't help that it is difficult to read!

Any help you could provide would be much appreciated

[et_miller_87]

Should be right there

Sent from my LG-H811 using Tapatalk

[tatersalad314]

Great, thanks!

My next question is how is it supposed to secure to the frame? I don't see any correlating threads... Trying to upload a picture here in a minute.

[tatersalad314]

This is what I'm dealing with

[et_miller_87]

Don't quote me on this as mine is currently in pieces in my garage but if you look in the red circle I drew, I believe it mounts by the two phillips head screws on the frame rail there

Sent from my LG-H811 using Tapatalk

[et_miller_87]

Sent from my LG-H811 using Tapatalk

[et_miller_87]

Hope that helps.

Sent from my LG-H811 using Tapatalk

[tatersalad314]

This is perfect, thanks man!

You may be hearing more from me in the future! I've taken the carbs off, cleaned them, have a battery, rear brake caliper and bracket, spark plugs, and the expansion tank ordered and on the way.

Only concern I have now are the spark plug boots. I've never seen the type with an exposed wire that you insert into the opposite end of the boot. I don't know how secure it is.

Anyway, thanks again! I'll find out how to donate to the site