fork tube size
Moderators: Site Director, FZR Forum Moderators
-
mike94fzr600
- Level 4.5
- Posts: 499
- Joined: Thu Jul 24, 2008 11:38 pm
- Location: waterford mi
fork tube size
i am looking to some Dual Headlight and it ask me for Fork Tube Size . it the chart they have right are they 38 mm if not what size are they? i have a 1994 600
my rides
2000 chevy z71 4x4
1993 Suzuki Samurai my mud \ trail toy
1994 fzr 600
2000 chevy z71 4x4
1993 Suzuki Samurai my mud \ trail toy
1994 fzr 600
-
the_finch
- Level 8.5
- Posts: 882
- Joined: Tue Jun 03, 2008 8:06 pm
- Location: Midland City, AL / UAHuntsville, Huntsville, AL
Re: fork tube size
From your avatar pic it looks like you have the stock fork tubes, which makes them 38mm. I suppose you're looking for a streetfighter headlight assembly for your bike? Any clamps you get to go on your bike have to be 38mm.
Hope that helps.
Hope that helps.
1997 FZR600RJ
Engine: K&N Drop-in air filter - stock airbox - FP 5°ignition advancer - EBC "Street Racer" Kevlar clutch
Exhaust: Stock header - Yoshimura RS-3 Carbon fiber slip-on
Body: Original paint/graphics - Clear Alternatives integrated LED Taillight - Flanders' flush front signals - YZF600 Mirrors - Comp. Werkes Stainless fender eliminator/tag bracket - 60w/55w H4 headlights
Tires: Metzler MEZ4B 120/70 ZR17 Front - Michelin Madacam 100x 150/70 ZR18 Rear
Brakes:Stock rotors with EBC HH Sinstered pads
In the works: YZF600 header, '97 Bandit 600 rear wheel, DynoJet Stage 3, Racetech Springs and Emulators fork rebuild, FZ1 rear shock, YZF600 front MC, Galfer SS Lines, CFM rearsets
-
mike94fzr600
- Level 4.5
- Posts: 499
- Joined: Thu Jul 24, 2008 11:38 pm
- Location: waterford mi
Re: fork tube size
thanks finch yes they are stock. i am looking for streetfighter headlight. they ask for the size of the forks for the clamps to mount them i just want to be sure they are right size befor i order them
my rides
2000 chevy z71 4x4
1993 Suzuki Samurai my mud \ trail toy
1994 fzr 600
2000 chevy z71 4x4
1993 Suzuki Samurai my mud \ trail toy
1994 fzr 600
-
the_finch
- Level 8.5
- Posts: 882
- Joined: Tue Jun 03, 2008 8:06 pm
- Location: Midland City, AL / UAHuntsville, Huntsville, AL
Re: fork tube size
Then the 38mm clamps should treat you well. If you are "streetfightering-out" your bike, one thing you may consider before ordering the headlight is what to do about the terribly soft front suspension. It would sorta suck to get an awesome headlight on your bike, and then a few months from now decide to to a fork swap for newer/better forks (which you could always rebuild them with springs/cartridge emulators) and have to buy the clamps all over again.
All that to say, be sure to plan ahead.
All that to say, be sure to plan ahead.
1997 FZR600RJ
Engine: K&N Drop-in air filter - stock airbox - FP 5°ignition advancer - EBC "Street Racer" Kevlar clutch
Exhaust: Stock header - Yoshimura RS-3 Carbon fiber slip-on
Body: Original paint/graphics - Clear Alternatives integrated LED Taillight - Flanders' flush front signals - YZF600 Mirrors - Comp. Werkes Stainless fender eliminator/tag bracket - 60w/55w H4 headlights
Tires: Metzler MEZ4B 120/70 ZR17 Front - Michelin Madacam 100x 150/70 ZR18 Rear
Brakes:Stock rotors with EBC HH Sinstered pads
In the works: YZF600 header, '97 Bandit 600 rear wheel, DynoJet Stage 3, Racetech Springs and Emulators fork rebuild, FZ1 rear shock, YZF600 front MC, Galfer SS Lines, CFM rearsets
-
megaloxana
- 2000+ Posts
- Posts: 2282
- Joined: Thu May 15, 2008 5:05 pm
- Location: Hanover, PA 17331
- Contact:
Re: fork tube size
Contact abs600fzrr and buy his 636 front fork setup. It would MAKE your street fighter 
'92 FZR 600
Airtech R1 kit \*/ 520 conversion \*/ 14F-47R gearing
K&N pod filters \*/ Stage 3 jet kit \*/ Factory Pro shift kit \*/ Full V&H SS exhaust
Custom '02 R6 undertail \*/ YZF gas tank \*/ Raised via dogbones \*/ custom flush turnsignals
Full R6 brake set-up \*/ SS lines \*/ Progressive fork springs \*/ ZX2 coilpack
ADD YOURSELF TO THE OFFICIAL FZRONLINE GOOGLE EARTH MAP
Airtech R1 kit \*/ 520 conversion \*/ 14F-47R gearing
K&N pod filters \*/ Stage 3 jet kit \*/ Factory Pro shift kit \*/ Full V&H SS exhaust
Custom '02 R6 undertail \*/ YZF gas tank \*/ Raised via dogbones \*/ custom flush turnsignals
Full R6 brake set-up \*/ SS lines \*/ Progressive fork springs \*/ ZX2 coilpack
ADD YOURSELF TO THE OFFICIAL FZRONLINE GOOGLE EARTH MAP
Re: fork tube size
Yeah no need to worry about whether it will work on an FZR because it curretly IS on an FZR. as Borat says "It's NIIIIIICE"
Duane...
Bike:
1994 Yamaha FZR 1000 EXUP
Factory Pro Stage 1 Jetting | K&N Filter | Corbin Seat | ProTek Keyless Gas Cap | GSXR Mirrors
My Thread
Cage:
2005 Saab 9-7x 5.3i Arc AWD
THE WIKI IS YOUR FRIEND
THE SEARCH IS YOUR SIGNIFICANT OTHER
USE THEM!!
Bike:
1994 Yamaha FZR 1000 EXUP
Factory Pro Stage 1 Jetting | K&N Filter | Corbin Seat | ProTek Keyless Gas Cap | GSXR Mirrors
My Thread
Cage:
2005 Saab 9-7x 5.3i Arc AWD
THE WIKI IS YOUR FRIEND
THE SEARCH IS YOUR SIGNIFICANT OTHER
USE THEM!!
-
mike94fzr600
- Level 4.5
- Posts: 499
- Joined: Thu Jul 24, 2008 11:38 pm
- Location: waterford mi
Re: fork tube size
well i might just have to look him up and see whats up
my rides
2000 chevy z71 4x4
1993 Suzuki Samurai my mud \ trail toy
1994 fzr 600
2000 chevy z71 4x4
1993 Suzuki Samurai my mud \ trail toy
1994 fzr 600