big bore kit
Moderators: Site Director, FZR Forum Moderators
-
fzrwarrior
- Site Newbie
- Posts: 12
- Joined: Sat Mar 07, 2009 5:28 pm
big bore kit
do they make a bigbore kit for the 600?
Re: big bore kit
There is a 619 and 630 kit. Here is a link to the company that makes it.
http://www.wiseco.com/default.aspx
The general consensus is that the 630 kit is not that good as it developes too much heat. I've heard of quallity issues as well, but not that many. This is an expensive thing to do as you have the cost of the kit plus most places charge $60 per cylinder to bore it.
http://www.wiseco.com/default.aspx
The general consensus is that the 630 kit is not that good as it developes too much heat. I've heard of quallity issues as well, but not that many. This is an expensive thing to do as you have the cost of the kit plus most places charge $60 per cylinder to bore it.
Yes, that is a Single Sided Swingarm FZR600 that I built.
Something is lurking, waiting, wanting to be built......It calls to me from the darkness....
I can finally see the light at the end of the tunnel....Then I realize that it is the train coming to run my ass over....
Something is lurking, waiting, wanting to be built......It calls to me from the darkness....
I can finally see the light at the end of the tunnel....Then I realize that it is the train coming to run my ass over....
-
abs929cbrrr
- 1000+ Posts
- Posts: 1171
- Joined: Sun May 11, 2008 12:53 pm
- Location: lebanon pa 17042
- Contact:
Re: big bore kit
i dont recoment the kit...you can get a yzf motor for the cost of this kit and they make more power anyway. it was a hot mod back in the day...its a waist of money now.
02 xr200r set up for XC
96 trx300ex set up for XC
im roadbike less!!!!!!
96 trx300ex set up for XC
im roadbike less!!!!!!
Re: big bore kit
Stick a 1 litre EXUP motor in it.