exup valve cables

badger3292 · Post by **badger3292** » Sun Oct 30, 2011 2:36 am

hi there ive recently had my EXUP valve seize up on me and whilst removing the header i also noticed the the cables are frayed and in bad need of replacing im just wandering if there is a special name for the cables so i can buy the correct one and ive also been told that the R1 cables fit and are cheaper to buy can any one clarify this for me please
many thanks paul

Stig · Post by **Stig** » Sun Oct 30, 2011 10:28 am

sorry for the plug but theres a how to over on Exup1000.co.uk which shows you haw to make your own cables ...its easy to do too and very cheap compared to the £35 for the OEM items

Post by **sweekster** » Sun Oct 30, 2011 6:51 pm

99-01 r1 exup are the exact as what is for the fzr1000. I have them on my 94 1000.

Post by **DonTZ125** » Sun Oct 30, 2011 11:01 pm

Stig wrote:sorry for the plug but theres a how to over on Exup1000.co.uk which shows you haw to make your own cables ...its easy to do too and very cheap compared to the £35 for the OEM items

Can you point out a link? I spent a good half-hour rummaging around, with lots of distractions (sigh)

Stig · Post by **Stig** » Mon Oct 31, 2011 4:37 am

I remember it was Nuggitt who did the feature and have saved it to my HD...problem is....my main PC died before I went away on hols nad havent had time to build the new one yet as I only got back yesterday. I'll contact Nuggitt to see if he remembers where it is or what the post was called

i'll get back asap

Paul

Stig · Post by **Stig** » Mon Oct 31, 2011 4:59 am

here you go... Theres no official link to it yet as i've not finished the section but thought to host the files ready due to alot of related questions

http://www.exup1000.co.uk/tech_info_are ... cables.htm

badger3292 · Post by **badger3292** » Mon Oct 31, 2011 6:05 am

thank you ill have a look at the link thanks

badger3292 · Post by **badger3292** » Mon Oct 31, 2011 11:12 am

well thanks for the link thats perfect just another quick question how do i know if mines an RU model and where do the cables go to from the exup valve on the header to ????? many thanks paul

Post by **DonTZ125** » Mon Oct 31, 2011 11:31 am

badger - the cables go from the pulley on the header up to the servomotor, behind the left tail panel near the front of the seat.

Stig - I rummaged through your tech talk directory - that's some interesting stuff there! If you don't have something comparable in the works, you might want to include a link to (IMO) the best EXUP maintenance site out there; http://www.cartestsoftware.com/fz1/exupmaintenance.html

badger3292 · Post by **badger3292** » Mon Oct 31, 2011 11:49 am

thanks ive ordered the new cables etc and ive managed to free up my exup valve so there pleny more work to do now lol

the link on how to do it is perfect thanks again

Stig · Post by **Stig** » Mon Oct 31, 2011 1:25 pm

badger3292 wrote:another quick question how do i know if mines an RU model ????? many thanks paul

The RU model has upside down forks as standard and an extra section of casting as part of the main frame where the seat attaches

The earlier R model 89-90 has the twin round headlights and right way upforks....but some folk add the extra USD forks an upgrade but the frame has less casting at the seat mount

Don, I was going to add that link for servicing the exup valve but not had time to complete things. Its all a task for the dark cold nights over winter.

badger3292 · Post by **badger3292** » Mon Oct 31, 2011 4:22 pm

ideal thanks stig mines an RU model then cheers

FZRSupport: the FZROnline Archive

exup valve cables

exup valve cables

Re: exup valve cables

Re: exup valve cables

Re: exup valve cables

Re: exup valve cables

Re: exup valve cables

Re: exup valve cables

Re: exup valve cables

Re: exup valve cables

Re: exup valve cables

Re: exup valve cables

Re: exup valve cables