==== How to Remove the Flywheel ====
**Time:** 30 minutues \\ 

**Required Tools:** 
    * 5mm allen wrench
    *[[http://www.toolsource.com/motorcycle-flywheel-puller-p-100172.html|flywheel puller]]
    * Hammer
    * Socket wrench


**Directions:**
  - Use the 5mm allen tool to remove the stator cover (left side of bike)
  - Remove the bolt in the middle of the flywheel (you may need a breaker bar)
  - Screw in the flywheel puller (tighten to around 20 Nm or so, as long as its not loose)
  - Take a hammer and whack the flywheel puller (Careful, don't damage the flywheel)
  - It may take a few whacks for the flywheel to loosen, it should then just slide right off
  - After removing the flywheel there should be a flywheel key (a little half moon shaped bit of metal ) that holds it in place, don't lose this.

{{:flywheel_.png?180|}}{{:flywheel_with_puller.png?180|}}{{:flywheel_removed.png?180|}}

[[http://fzronline.com/forum/viewtopic.php?f=32&t=1096|{{  :comments.gif  |CLICK HERE}}]]

----
- icontender