DokuWiki

Edit the page and hit Save. See syntax for Wiki syntax. Please edit the page only if you can improve it. If you want to test some things, learn to make your first steps on the playground.

====== THIS IS WHAT I HAVE TO WORK WITH ======

[[http://fzrsupport.com/forum/viewtopic.php?f=30&t=2561]]

* This mod will allow you to use any year or make fork setup on your FZR

* By using a threaded rod in 1/2inch or 5/8inch you are able to use any 
year model or make for this build. My first set of bushings were single sided
and r6 stem was chopped to use for taking up the slack in the upper and lower
triple holes.
  * We now have come up with a design to use a double ended bushing on the top
and bottom of the triple and bearings. It will serve as taking up slack in the triples 
and providing a place for the bearings to rest on. Oem bearings are retained in this 
mod.
  * The 1st set of bushings were made from 6061 Aluminum Rod. These are still in place
and used in my bike. I will give a 500 mile and 1000 mile inspection this summer.
 We have now changed to Steel Double Sided bushings giving it a more solid fit for
 added security and tolerances.
  * I want to thank (Rob) CAD600 for everything on this build. Together we will be 
able to provide the bushings for any fork build you may have.
  * I have purchased my own metal lathe and will be producing bushings for this mod.
If you need anything made let one of us know. Thanks!8-)

====== Materials List: ======
  * Triples, these are for a 99-02 R6 but any other YEARS / MODEL will work
  * Fork Tubes, that match the Triples
  * Hardened threaded rod in either 1/2inch or 5/8inch
  * Double ended bushings (contact cad600 or 95FZR600)
  * Clipons, that match the forks
  * Wheel / Brakes, that match the forks
  * Use your existing FZR bearings,spacers and dust caps

{{:r6_triples.jpg|}}
====== 2 Bushings need to be made for upper and lower triples: ======
{{:img1687fm1.jpg|}}
====== After bushings were made to fit: ======
  * The OEM stem was cut at the bottom triple and used for a bushing
  * I also cut the OEM stem at the top below both sets of threads and used at the top
  * In the future we will be using a double ended bushing for top and bottom and the OEM stem will not be used.
{{:img1705yw7.jpg|}}
{{:img1706iz4.jpg|}}
====== THIS IS HOW IT WILL BE INSTALLED ON BIKE ======
  * I want to thank (rob) cad600 for the use of his bike and also designing the bushings
  * Once the bushings were cut we were able to install them on his bike (FZR600)
  * You can see the bushings are to take up space of the OEM stem
  * The OEM needle bearings and dust covers were used from the FZR

Contact: Cad600 or 95FZR600 for bushings
===== UPDATE from TONY FOALE on the Design =====

see:-[[http://fzrsupport.com/forum/viewtopic.php?f=30&t=2561&start=105]]

OR

Pix entitled "BottomYoke., Bottom Yoke 1, Bottom yoke 2, Bottom yoke 3..." at

[[http://www.tonyfoale.com/AermacchiFrame/?N=A]]

==== Editted by Y-G on 2010-01-05 ====

Edit summary

Note: By editing this page you agree to license your content under the following license: CC Attribution-Noncommercial-Share Alike 4.0 International