89 FZR1000 Rehab Thread
Moderators: Site Director, FZR Forum Moderators
-
saabdriver
- Site Newbie
- Posts: 16
- Joined: Mon Dec 06, 2010 1:42 am
Re: 89 FZR1000 Rehab Thread
I've got the Haynes Manual. I got everything unbolted today in my 12 degree F garage. Using a kerosene heater to knock off the chill (if thats really possible). Only trouble I had was getting the cables off the EXUP exhaust, but the manual helped me there. I'm going to unbolt it from the frame tomorrow and hopefully pull it out. I'll post back with the progress.
-
saabdriver
- Site Newbie
- Posts: 16
- Joined: Mon Dec 06, 2010 1:42 am
Re: 89 FZR1000 Rehab Thread
So I've got all the pinch bolts loosened, and I was able to take out the rear top frame bolt (I loosened it actually, it spins by hand now). However I'm having trouble taking out the front most mounting bolts. I actually broke an allen wrench and a socket with an allen bit. Is there a trick to finagling these out? Again, the pinch bolts are out. TIA.