GH:- Fuel Injection kits OFF THE SHELF detroit area

Here is where technical data is provided.

Moderators: Site Director, FZR Forum Moderators

Locked
User avatar
Nik
100+ Posts
100+ Posts
Posts: 128
Joined: Sat Jul 16, 2011 8:12 am
Location: Trinidad, West Indies

GH:- Fuel Injection kits OFF THE SHELF detroit area

Post by Nik »

http://ecotrons.com/

Y-G this company seems to be heading your way LoL
W.F O
Nik H.
There are two kinds of posts on Forums.
1. This is what I have done...
2. This is what I think...
Be aware of the difference!
Freestyle72
Level 4.0
Level 4.0
Posts: 418
Joined: Sun May 10, 2009 8:23 am
Location: Milton, Ontario, Canada

Re: GH:- Fuel Injection kits OFF THE SHELF detroit area

Post by Freestyle72 »

price is definately right. could be real good source for throttlebodies to fit any application.

The ecu seems somewhat limited compared to microsquirt though.

good find
DonTZ125
Moderator
Posts: 2214
Joined: Tue Dec 02, 2008 11:20 pm
Location: Scarberia, ON
Contact:

Re: GH:- Fuel Injection kits OFF THE SHELF detroit area

Post by DonTZ125 »

The ECU is designed to work with a narrow-band O2 sensor, and tries to maintain 14.7 under all conditions. For a monkey bike, sure. Try that WFO with a sport bike engine, and you'll be buying a new engine. Also, their "400-800cc" kit includes a single 240cc/min injector, which would run my FZR250 WAY lean - there isn't TIME for the pulse widths!
User avatar
Nik
100+ Posts
100+ Posts
Posts: 128
Joined: Sat Jul 16, 2011 8:12 am
Location: Trinidad, West Indies

Re: GH:- Fuel Injection kits OFF THE SHELF detroit area

Post by Nik »

DonTZ125 wrote:The ECU is designed to work with a narrow-band O2 sensor, and tries to maintain 14.7 under all conditions. For a monkey bike, sure. Try that WFO with a sport bike engine, and you'll be buying a new engine. Also, their "400-800cc" kit includes a single 240cc/min injector, which would run my FZR250 WAY lean - there isn't TIME for the pulse widths!


Don,
Having looked carefully I think the only Multi-cyl they do is a4 stroke twin the rest are all aimed at single Cyl jobs 2 stroke & 4stroke.

Y_G, Brian (One of KGB's founding Trio ) & I had some beer & bench racing "discussions" in to the wee small hours, when Y-G was here in the summer, about converting a Couple of DT's & Bultaco's to FI .

No doubt Y-G will raid my Bank account to buy a trial set up, since he cannot raid my freezer LoL
W.F O
Nik H.
There are two kinds of posts on Forums.
1. This is what I have done...
2. This is what I think...
Be aware of the difference!
Locked