When testing the voltage regulator and stator?

FZR600 Forum

Moderators: Site Director, FZR Forum Moderators

Post Reply
lilflippy
50+ Posts
50+ Posts
Posts: 52
Joined: Tue May 03, 2011 9:19 am
Location: Illinois

When testing the voltage regulator and stator?

Post by lilflippy »

Ok do I have to take out the fuse for the headlight to get a proper reading?
Top
DonTZ125
Moderator
Posts: 2214
Joined: Tue Dec 02, 2008 11:20 pm
Location: Scarberia, ON
Contact:
Contact DonTZ125

Re: When testing the voltage regulator and stator?

Post by DonTZ125 »

No, check the VRR as it will be operated.

Measure the voltage across the battery terminals to check the VRR's output.
Top
lilflippy
50+ Posts
50+ Posts
Posts: 52
Joined: Tue May 03, 2011 9:19 am
Location: Illinois

Re: When testing the voltage regulator and stator?

Post by lilflippy »

OK I left the headlight fuse in. Tested reved to 3000rpm and tested across battery terminals it reads 13.8. At idle its at 13.2

With the bike off the battery tests at 12.7v

So my stator and voltage regulator is good?
Last edited by lilflippy on Mon May 16, 2011 5:05 pm, edited 1 time in total.
Top
DonTZ125
Moderator
Posts: 2214
Joined: Tue Dec 02, 2008 11:20 pm
Location: Scarberia, ON
Contact:
Contact DonTZ125

Re: When testing the voltage regulator and stator?

Post by DonTZ125 »

Sounds good to me!
Top
Post Reply

Return to “FZR600”