my new toy :)

ronny86 · Post by **ronny86** » Fri May 06, 2011 4:43 pm

the brake hoses were upgraded to braided ones roughly 1.5 years ago, ill get some DOT3 and replace the fluid just to be safe, least then i can feel that bit safer i guess

yamaha_george · Post by **yamaha_george** » Fri May 06, 2011 6:22 pm

R,
taking aquick peek at the pictures you look to have stainless steel lines NOT rubber. If that is the case Don is spot on & I did say all Fluids for your own peace of mind.
If not that rubber hose set is well past its sell by date so go stainless steel lines.

ronny86 · Post by **ronny86** » Sat May 07, 2011 1:53 am

ye they are stainless steel lines

yamaha_george · Post by **yamaha_george** » Sat May 07, 2011 2:26 am

ronny86 wrote:ye they are stainless steel lines

OK so replacing the fluid is gonna be easier

ronny86 · Post by **ronny86** » Sun May 08, 2011 9:31 am

do the fuel pumps on fzrs have a sensor to cut out when petrol is well low? just tried starting my bike then and the fuel pump wasnt doing its usual clicking :-/

Post by **DonTZ125** » Sun May 08, 2011 9:36 am

Is this a 1000? If so, then yes - there is a sensor in the tank that will chop the fuel pump at some 'low' level. Once you flip the 'Reserve' switch in the left fairing, the pump comes back on.

ronny86 · Post by **ronny86** » Sun May 08, 2011 9:46 am

nope its a 600, i turn key and theres no clicking at all on reserve or not

having nothing but issues with this bike atm

Post by **DonTZ125** » Sun May 08, 2011 10:09 am

*wince* Check your Ignition fuse, check the wires and connectors at the pump, TCI, and main relay assembly (left side rear, behind the seat fairing).

Does the bike start?

ronny86 · Post by **ronny86** » Sun May 08, 2011 10:12 am

found the problem! the earth wire on the fuel pump has frade, think ill buy a new pump

Post by **DonTZ125** » Sun May 08, 2011 10:14 am

If it's just a bad wire, can you not simply patch it?

ronny86 · Post by **ronny86** » Sun May 08, 2011 10:14 am

normally yes, but its me were on about here ^_^

ronny86 · Post by **ronny86** » Sun May 08, 2011 10:20 am

i could do it but just need a new o ring crimp

yamaha_george · Post by **yamaha_george** » Sun May 08, 2011 4:59 pm

ronny86 wrote:i could do it but just need a new o ring crimp

Ronnie,
sooner or later in biking & bike repair it is a case of "hold yer nuts and go brave "

ronny86 · Post by **ronny86** » Mon May 09, 2011 10:34 am

the beast from the english north east is alive and screaming once again... and no i dont mean my partner >.< lol

fixed it today and seems better than ever

yamaha_george · Post by **yamaha_george** » Mon May 09, 2011 10:37 am

ronny86 wrote:the beast from the english north east is alive and screaming once again... and no i dont mean my partner >.<

fixed it today and seems better than ever

Great stuff another satisfied customer if we keep this up we can all retire & go riding

FZRSupport: the FZROnline Archive

my new toy :)

Re: my new toy :)

Re: my new toy :)

Re: my new toy :)

Re: my new toy :)

Re: my new toy :)

Re: my new toy :)

Re: my new toy :)

Re: my new toy :)

Re: my new toy :)

Re: my new toy :)

Re: my new toy :)

Re: my new toy :)

Re: my new toy :)

Re: my new toy :)

Re: my new toy :)