NEED HELP with FR Brake Switch assembly
Moderators: Site Director, FZR Forum Moderators
-
basstracker
- Site Newbie
- Posts: 20
- Joined: Sat Mar 05, 2011 8:39 pm
NEED HELP with FR Brake Switch assembly
I have a 90 FZR 1000 EXUP, I recently disassembled my front brake lever and fluid reservoir and now cant figure out to reinstall the front brake switch lead! Just were it connects back to the lever! HELP
-
kilika2
- 1000+ Posts
- Posts: 1268
- Joined: Thu Sep 24, 2009 2:50 pm
- Location: South East Missouri
- Contact:
Re: OOOPPS NEED HELP
Are you talking about the switch that brings on the brake light?
Chris.
Chris.
Before(5/5/09)_____________After(5/5/10)_____________Way After(8/1/10)
1995 FZR600 Sold
2006 R1 Sold :-\
2009 Buell 1125R
-
basstracker
- Site Newbie
- Posts: 20
- Joined: Sat Mar 05, 2011 8:39 pm
Re: OOOPPS NEED HELP
yes as of right now the brake light is stuck on
-
kilika2
- 1000+ Posts
- Posts: 1268
- Joined: Thu Sep 24, 2009 2:50 pm
- Location: South East Missouri
- Contact:
Re: OOOPPS NEED HELP
There's two wires on the 1k correct? I'm guessing you tried switching them? If yes then make sure it's not the rear brake that is stuck keeping the light on. Ask me how I know.
Chris.
Chris.
Last edited by kilika2 on Sat Apr 23, 2011 11:20 pm, edited 1 time in total.
Before(5/5/09)_____________After(5/5/10)_____________Way After(8/1/10)
1995 FZR600 Sold
2006 R1 Sold :-\
2009 Buell 1125R
Re: OOOPPS NEED HELP
It's not impossible for the front switch to be frozen - just far more LIKELY to be the rear. With the front leads disconnected, is the brake light on?
1989 3LN1 FZR250R, currently stock.
TTR Ignition Systems
TCI Repair and Ignition Transistor Upgrade
VRR Adaptor Harness
YZF600 TCI Adaptor
Running Light Fuse Carrier
TTR Ignition Systems
TCI Repair and Ignition Transistor Upgrade
VRR Adaptor Harness
YZF600 TCI Adaptor
Running Light Fuse Carrier
-
basstracker
- Site Newbie
- Posts: 20
- Joined: Sat Mar 05, 2011 8:39 pm
Re: OOOPPS NEED HELP
Sorry im not asking about any wiring just the internals on the switch, like the little spring and the metal rod! I know I sound like an IDIOT HAHA
-
yamaha_george
- 5000+ Posts
- Posts: 5853
- Joined: Fri May 09, 2008 8:46 am
- Location: west london UK
Re: OOOPPS NEED HELP
BT,basstracker wrote:Sorry im not asking about any wiring just the internals on the switch, like the little spring and the metal rod! I know I sound like an IDIOT HAHA
no you do not we have all gone a step too far with something and landed in the "soup", I will repeat my wife's plea for a picture of the bits & I will print it and try and figure it out for you.
