This cut down tail....

rehaume · Post by **rehaume** » Sun Mar 14, 2010 12:25 pm

I found this picture, does anyone know what he is doing for a tail light, or if their are anymore pictures of the progress on this tail, I'm about to cut mine up like this but need a lil more info, thanks!

the red one is mine, thanks

haro504 · Post by **haro504** » Sun Mar 14, 2010 2:55 pm

i cant remmeber what light was used iv seen people use a led trailer light

Post by **sweekster** » Sun Mar 14, 2010 7:53 pm

I want to say that's a very old pic of Billy Awesome's bike and he had an r6 light on there. Not 100% sure though

90hatch268 · Post by **90hatch268** » Mon Mar 15, 2010 1:41 am

saw this bike in a tail chopping thread. he used a clear LED trailer light

rehaume · Post by **rehaume** » Mon Mar 15, 2010 9:05 am

thanks guys!

delvryboy · Post by **delvryboy** » Mon Mar 15, 2010 1:49 pm

That's hot. I like the overflow bottle. I think I'm going to do this.

rehaume · Post by **rehaume** » Tue Mar 16, 2010 6:14 pm

hehe, I like the overflow bottle as well, but really their are so many different things you could use for an overflow bottle, good catch, but yes as soon as i get my bike back from my mechanic my tail will cut up.... if it dosnt work out as well as his did ill probably end up getting the R1 tail from airtech. thanks! p.s. if anyone has anymore pics of this creation or similar ones please post'em

90hatch268 · Post by **90hatch268** » Tue Mar 16, 2010 11:15 pm

heres a pic of mine. i just did it today so i havnt moved the license plate up or cleaned the wiring yet

rehaume · Post by **rehaume** » Wed Mar 17, 2010 11:12 pm

thats awesome,can you get a side shot? are you going to try and make an undertail for it? if so, let ,me know what your using

90hatch268 · Post by **90hatch268** » Thu Mar 18, 2010 2:43 pm

closest to a side shot i had

rehaume · Post by **rehaume** » Fri Apr 09, 2010 10:35 am

well i did it... tail is cut down, custom stainless steel overflow bottle, tail light of my choice was a CBR F4i tail light. and now it looks stock and newer.

ill post pics soon... only had to fab a few brackets.

rehaume · Post by **rehaume** » Sat Apr 10, 2010 11:11 pm

well here they are... let me know what you think, thanks.

before

overflow bottle

After the cut, and brackets made and the CBR F4i tail light installed...

delvryboy · Post by **delvryboy** » Sat Apr 10, 2010 11:45 pm

What did you use to cut?

rehaume · Post by **rehaume** » Sat Apr 10, 2010 11:58 pm

I used a dremel multi max, it cut very well.

delvryboy · Post by **delvryboy** » Sun Apr 11, 2010 12:06 am

Didn't burn the paint or plastic at all? What type of bit?

BTW - it looks freakin' sweet. One of the best I've seen.

FZRSupport: the FZROnline Archive

This cut down tail....

This cut down tail....

Re: This cut down tail....

Re: This cut down tail....

Re: This cut down tail....

Re: This cut down tail....

Re: This cut down tail....

Re: This cut down tail....

Re: This cut down tail....

Re: This cut down tail....

Re: This cut down tail....

Re: This cut down tail....

Re: This cut down tail....

Re: This cut down tail....

Re: This cut down tail....

Re: This cut down tail....