I have a kit from these guys for my SVX, and it's a great, compact, well priced setup (super bright, too). Anyone use these for a FZR? Also, what's our bulb type? I don't have my FSM in front of me (I'm sure I'll check it out when I get home, though).
http://www.ddmtuning.com/index.php?p=pr ... &parent=61
DDM HIDs
Moderators: Site Director, FZR Forum Moderators
Re: DDM HIDs
I haven't used as I still have the standard bulbs in my 94 1000. The bulbs should be H4 35w if memory servers correct.
Duane...
Bike:
1994 Yamaha FZR 1000 EXUP
Factory Pro Stage 1 Jetting | K&N Filter | Corbin Seat | ProTek Keyless Gas Cap | GSXR Mirrors
My Thread
Cage:
2005 Saab 9-7x 5.3i Arc AWD
THE WIKI IS YOUR FRIEND
THE SEARCH IS YOUR SIGNIFICANT OTHER
USE THEM!!
Bike:
1994 Yamaha FZR 1000 EXUP
Factory Pro Stage 1 Jetting | K&N Filter | Corbin Seat | ProTek Keyless Gas Cap | GSXR Mirrors
My Thread
Cage:
2005 Saab 9-7x 5.3i Arc AWD
THE WIKI IS YOUR FRIEND
THE SEARCH IS YOUR SIGNIFICANT OTHER
USE THEM!!
Re: DDM HIDs
So, both bulbs are H4s, just aimed differently? If so, the 35w kit is <$65 shipped. The only beef I have with the ones on my car (look like the same ballasts) is that they take a couple of seconds to warm up. Once warm, they're instant on/off. Still, it might be annoying switching from low to high beam if you need it immediately.
I may just have to be the guinea pig for these ones. Of course, I may also have trouble justifying another purchase when I haven't even gotten the title sorted out yet
I may just have to be the guinea pig for these ones. Of course, I may also have trouble justifying another purchase when I haven't even gotten the title sorted out yet
1989 Yamaha FZR1000
30k Miles, SS Brake Lines, Stock EXUP, Custom Dings and Scuff Marks
-
- 5000+ Posts
- Posts: 5853
- Joined: Fri May 09, 2008 8:46 am
- Location: west london UK
Re: DDM HIDs
Zandar wrote:So, both bulbs are H4s, just aimed differently? If so, the 35w kit is <$65 shipped. The only beef I have with the ones on my car (look like the same ballasts) is that they take a couple of seconds to warm up. Once warm, they're instant on/off. Still, it might be annoying switching from low to high beam if you need it immediately.
I may just have to be the guinea pig for these ones. Of course, I may also have trouble justifying another purchase when I haven't even gotten the title sorted out yet
Z,
this has all been done before look with SEARCH & in the WIKI for guidance
Re: DDM HIDs
I installed H4 8500K 55w H.I.D. bulbs from eurodezigns.com. 1 blue and 1 amber, they are both high/low beam bulbs and are great, very bright. I'v been using them for about 3 years worry free. They were about $13 and have a Lifetime Warranty. If 1 blows out, you mail the blown bulb back in a standard letter envelope with a 3 stamps and a money order for $6.95. I use these on my '03 Avalanche as well, high, low, and fog.
There site is currently under construction but you can email them for info on how to make a purchase at sales@eurodezigns.com . I have had no problems and they are an easy company to deal with. They are on ebay as well, which is where I made my 1st purchase from 3 years ago.
There site is currently under construction but you can email them for info on how to make a purchase at sales@eurodezigns.com . I have had no problems and they are an easy company to deal with. They are on ebay as well, which is where I made my 1st purchase from 3 years ago.
"In like Flynn"
-
- 5000+ Posts
- Posts: 5853
- Joined: Fri May 09, 2008 8:46 am
- Location: west london UK
Re: DDM HIDs
Hi,ofloinn3 wrote:I installed H4 8500K 55w H.I.D. bulbs from eurodezigns.com. 1 blue and 1 amber, they are both high/low beam bulbs and are great, very bright. I'v been using them for about 3 years worry free. They were about $13 and have a Lifetime Warranty. If 1 blows out, you mail the blown bulb back in a standard letter envelope with a 3 stamps and a money order for $6.95. I use these on my '03 Avalanche as well, high, low, and fog.
There site is currently under construction but you can email them for info on how to make a purchase at sales@eurodezigns.com . I have had no problems and they are an easy company to deal with. They are on ebay as well, which is where I made my 1st purchase from 3 years ago.
would be better if your profile said where in the world you, as it is you may be recommending a US company which is parochial enough not to sell world wide................................................................................................
Re: DDM HIDs
OK, got a pair of the DDM HIDs installed yesterday. 35W, 5000K, H4 Hi/lows. Install was pretty straightforward, though I don't think I found the best place for the ballasts. They're really small, but the wires didn't have that much length (some had too much, some too little) so that limited my options (I also didn't have any extension wires and I was eager to get them in and working; I may change positions later).
So far, so good! They run on a solenoid switch for going from low to high, so it's really just a re-aim. This is nice because they take a second or two to warm up when you turn them on cold, but since it uses the same bulb for hi and low there's no lag in light when switching. I have yet to run them at night (I will tonight), but they're already noticeably brighter than the Sylvania super brights (HID-like) I had in there.
For under $70, not a bad deal at all! I'll report back if they act up, but I really dig 'em thus far.
So far, so good! They run on a solenoid switch for going from low to high, so it's really just a re-aim. This is nice because they take a second or two to warm up when you turn them on cold, but since it uses the same bulb for hi and low there's no lag in light when switching. I have yet to run them at night (I will tonight), but they're already noticeably brighter than the Sylvania super brights (HID-like) I had in there.
For under $70, not a bad deal at all! I'll report back if they act up, but I really dig 'em thus far.
1989 Yamaha FZR1000
30k Miles, SS Brake Lines, Stock EXUP, Custom Dings and Scuff Marks
-
- 5000+ Posts
- Posts: 5853
- Joined: Fri May 09, 2008 8:46 am
- Location: west london UK
Re: DDM HIDs
Thanks for the feedback on this subject