Bike transporting SAFELY

Any topic relating to the FZR/YZF (UK) or motorcycling in general.

Moderators: Site Director, FZR Forum Moderators

Post Reply
yamaha_george
5000+ Posts
5000+ Posts
Posts: 5853
Joined: Fri May 09, 2008 8:46 am
Location: west london UK

Bike transporting SAFELY

Post by yamaha_george »

Guys & Gals
came across this on one of my many biker lists and think it is an idea of some MERIT:-

http://www.jawfish.net/wp/archives/186

not usable for race bikes, but seem great for the dirt bikes. but I think with a little input from us gear heads Cad600, modking and the like we could whip it into shape for us race bike dudes, the suggestions so far are vynle covered cables instead of the hoop sto pull the rear of the front tyre into the boot section



My new system for tying-down the dirty bikes:

http://www.jawfish.net/wp/archives/187

Cheap and effective, perhaps not so pretty. You guys could whip up some custom ones that would be tasty!

John Fisher is the guy with the idea and has realised that with some prompting from moi that the jack bobbins could be utilised at the rear end.
Feel free to experiment and discuss .........................
User avatar
95FZR600
2000+ Posts
2000+ Posts
Posts: 2972
Joined: Sat May 31, 2008 10:41 pm
Location: Kennesaw, Georgia

Re: Bike transporting SAFELY

Post by 95FZR600 »

I plan on getting some wheel chocks for my trailer. They are the way to go. I always use a tie down on each side of the handle bar and then compress the forks and ighten down. The wheel chocks are the way to go.


Very good info yamaha george! ClapHands
2002 Yamaha R6-----2003 Yamaha R6

Image
User avatar
YAM93
1000+ Posts
1000+ Posts
Posts: 1019
Joined: Sat May 17, 2008 8:19 pm
Location: Maryland, USA

Re: Bike transporting SAFELY

Post by YAM93 »

Excellent find. Around here quite a few guys have those, but they usually have the rear ramp / cage on them, to avoid the bikes backing out, or from a skidding car climbing right up on there and making Suzuki pancakes. I use a sled mount on my SUV from a company called Joe Hauler. (joehauler.com). Of course mine is wide open to getting rear-ended also, but has been able to carry all my bikes (1 at a time) when needed.

In a few years I plan on having a fully enclosed trailer, large enough to carry all 3 bikes and all my tools, supplies, etc. They're pretty expensive though.
Image
" several meat-eaters lay in vomit, too weak to move..."
User avatar
95FZR600
2000+ Posts
2000+ Posts
Posts: 2972
Joined: Sat May 31, 2008 10:41 pm
Location: Kennesaw, Georgia

Re: Bike transporting SAFELY

Post by 95FZR600 »

Those enclosed trailers are high dollar and I cant figure out why. Although Im trying to find a cheap one on craigslist. My buddy bought one at a flea market for $1500 and it is a 16' hauler with electric brakes and all. Very nice and almost new looking. He's on the lookout for a smaller one for me. I would like to haul my dirt bikes in one.
2002 Yamaha R6-----2003 Yamaha R6

Image
yamaha_george
5000+ Posts
5000+ Posts
Posts: 5853
Joined: Fri May 09, 2008 8:46 am
Location: west london UK

Re: Bike transporting SAFELY

Post by yamaha_george »

95FZR600 wrote:Those enclosed trailers are high dollar and I cant figure out why. Although Im trying to find a cheap one on craigslist. My buddy bought one at a flea market for $1500 and it is a 16' hauler with electric brakes and all. Very nice and almost new looking. He's on the lookout for a smaller one for me. I would like to haul my dirt bikes in one.
Our shop had a trailer till someone liked it more than us so we went whole Hog and bought a van. The front half was portable work shop & spares to sell service at the race site.
The rear end was for the bikes with welded drop rings for tie downs .
We never had serious issues just minor niggles like not enough room to get 3 bikes cinched down totally to my satisfaction. banghead
Which is why i loved those "boots" & turnbuckles. Nerd
Geo.
Post Reply