jacket size

Any topic relating to the FZR/YZF (UK) or motorcycling in general.

Moderators: Site Director, FZR Forum Moderators

Post Reply
kracksmith
Site Newbie
Posts: 26
Joined: Sun Jul 27, 2008 4:02 am

jacket size

Post by kracksmith »

i'm not sure where to put this so here goes.

my chest size is exactly 40"

the chart size says 40" chest = size 40
42 chest = size 42 jacket
and 44 chest = size 44 jacket.

would a size 44 jacket be too big?
User avatar
ragedigital
4000+ Posts
4000+ Posts
Posts: 4153
Joined: Wed May 07, 2008 9:30 am
Location: Northwest St. Louis

Re: jacket size

Post by ragedigital »

I would think yes, it probably would be. I like tight jackets for motorcycle use.

Is there anyway to try it on at a local store?
Thanks for joining and participating in the most "active" FZR Community on the internet!
kracksmith
Site Newbie
Posts: 26
Joined: Sun Jul 27, 2008 4:02 am

Re: jacket size

Post by kracksmith »

unfortunately it's a online store and it's on sale.

i can't try it on.
bweight
Level 4.0
Level 4.0
Posts: 421
Joined: Wed May 07, 2008 4:03 pm
Location: Sudbury, ON, Canada

Re: jacket size

Post by bweight »

Can you go to a local store and try on jackets there? just so you know what size you are....

I also think that it's better to have a jackets that's more on the snug side than loose. That way if (hopefully you don't) you go down, the pads and armor stay where they're supposed to and protect you the way they are intended to do so.

my2cents
89 FZR 400
Custom Paintjob
600 plastics.
06 - R6 Shock
FZR600 Motor
Polished Frame & Engine Covers

Soon to be:
Broke........

Image
FZROnline.com Decals. Get yours Now!!!
old_school
Level 8.0
Level 8.0
Posts: 824
Joined: Mon May 12, 2008 5:52 pm
Location: Princeton, NJ

Re: jacket size

Post by old_school »

Agreed That's what i usually do.. I find what i like get the details worked than buy it online... Sometimes that not possible with closeouts etc. (eg. Newenough.com has closeout you'll never find anywhere else)
NO FZR :(
05 Yamaha R1
03 Harley Fatboy
what's next?
User avatar
cad600
1000+ Posts
1000+ Posts
Posts: 1413
Joined: Fri May 09, 2008 3:41 pm
Location: Atlanta, GA

Re: jacket size

Post by cad600 »

You've got to go try one on. I'm not a "big" person, but because I have broad shoulders and long arms I take between a 48 and 50 for a jacket. My chest is no were near that size but if I were to get one that fit my chest, I wouldn't be able to move my arms and the sleeves would stop above my watch.
Yes, that is a Single Sided Swingarm FZR600 that I built.

Something is lurking, waiting, wanting to be built......It calls to me from the darkness....

I can finally see the light at the end of the tunnel....Then I realize that it is the train coming to run my ass over....
User avatar
megaloxana
2000+ Posts
2000+ Posts
Posts: 2282
Joined: Thu May 15, 2008 5:05 pm
Location: Hanover, PA 17331
Contact:

Re: jacket size

Post by megaloxana »

I plan on getting a jacket here soon too. I was just gonna go to the stealership and try on different brands of jacket before I bought one online.
'92 FZR 600
Airtech R1 kit \*/ 520 conversion \*/ 14F-47R gearing
K&N pod filters \*/ Stage 3 jet kit \*/ Factory Pro shift kit \*/ Full V&H SS exhaust
Custom '02 R6 undertail \*/ YZF gas tank \*/ Raised via dogbones \*/ custom flush turnsignals
Full R6 brake set-up \*/ SS lines \*/ Progressive fork springs \*/ ZX2 coilpack


ADD YOURSELF TO THE OFFICIAL FZRONLINE GOOGLE EARTH MAP :bunny :banjoman
Post Reply