Another helmet thread.

Any topic relating to the FZR/YZF (UK) or motorcycling in general.

Moderators: Site Director, FZR Forum Moderators

User avatar
bucket
100+ Posts
100+ Posts
Posts: 108
Joined: Mon Jun 09, 2008 10:38 am
Location: Chandler AZ and its HOT!!!

Another helmet thread.

Post by bucket »

This has to be the worst thing I have ever shopped for! I’m looking at spending around $200.( I know you get what you pay for but its better then the $80 helmet I have know)

I was looking at the Bell apex and the Scorpion EXO-700. Im jut looking to see if anybody has one of these or have an opinion on one. Or a suggestion on a different helmets. Most important is venting I live in Arizona and its HOT! Second is weight. Any opinions would be great.
User avatar
surgscrubfzr
50+ Posts
50+ Posts
Posts: 99
Joined: Tue May 13, 2008 12:30 am
Location: concord, california

Re: Another helmet thread.

Post by surgscrubfzr »

check on ebay for some good deals. i bought a icon maniac helmet for 150 plus shipping brand new.
ImageImage
User avatar
the_finch
Level 8.5
Level 8.5
Posts: 882
Joined: Tue Jun 03, 2008 8:06 pm
Location: Midland City, AL / UAHuntsville, Huntsville, AL

Re: Another helmet thread.

Post by the_finch »

I live in south Alabama and it gets into the triple digits here too. I got an Icon Domain 2 perimeter in blue and it stays cool all day long. It has like 7 air scoops that I always leave open. The downside is, with all that ventillation, you basicly have to wear earplugs if you'll be riding for more than 20 minutes so as to keep yourself from getting a pounding headache from the road noise. :duh:

Downside on the Domain 2? $330 through http://www.revzilla.com was the best price I could find. :swear

I almost went with the Airframe, which is supposed to flow just as well or better. :ermm:

My passenger helmet is an old black HJC C12 that I picked up when a buddy needed gas and had a spare helmet laying around. It gets warm really quick.

Hope that helps somewhat. my2cents
Image
1997 FZR600RJ

Engine: K&N Drop-in air filter - stock airbox - FP 5°ignition advancer - EBC "Street Racer" Kevlar clutch
Exhaust: Stock header - Yoshimura RS-3 Carbon fiber slip-on
Body: Original paint/graphics - Clear Alternatives integrated LED Taillight - Flanders' flush front signals - YZF600 Mirrors - Comp. Werkes Stainless fender eliminator/tag bracket - 60w/55w H4 headlights
Tires: Metzler MEZ4B 120/70 ZR17 Front - Michelin Madacam 100x 150/70 ZR18 Rear
Brakes:Stock rotors with EBC HH Sinstered pads
In the works: YZF600 header, '97 Bandit 600 rear wheel, DynoJet Stage 3, Racetech Springs and Emulators fork rebuild, FZ1 rear shock, YZF600 front MC, Galfer SS Lines, CFM rearsets
thatkid
2000+ Posts
2000+ Posts
Posts: 2026
Joined: Sun May 18, 2008 1:25 am
Location: Chicago, IL
Contact:

Re: Another helmet thread.

Post by thatkid »

I've been sporting the KBC VR-2 Gunslinger edition for a year now and have no problems with it. It does get a little warm in traffic but otherwise I have loved it. They run a bit on the smaller side so order up a size if you can't find a local place to try one on. This place has them on sale for 169 for M or L. Down from 269.
http://www.extremesupply.com/kbchelmets ... etsvr2.htm

Had a HJC AC11 before that and it was alright. The KBC is a better fitting helmet though. Less wobble and less noise.
Image
Do YOU Scopper?

"When some people cry, it's not because they’re weak. It’s because they’ve been strong for far too long."
User avatar
mszilves
Level 1.5
Level 1.5
Posts: 151
Joined: Fri May 09, 2008 1:52 pm

Re: Another helmet thread.

Post by mszilves »

I think it all comes down to personal fit. I have 2 Scorpion EXO-700s, and absolutely love them! You get tons of features for the money, and in my opinion, one of the best values on the market.
ImageImage

'03 Liquid Silver R6
'91 FZR 600
'97 Forks w/ .85kg/mm Race Tech springs, Gold-Valve Emulators (2 turns), 20w fork oil / Fox Twin Clicker
R6 front calipers and master cylinder, R6 tail
YZF swingarm conversion
'01 R1 Digital Cluster conversion
K&N Drop-In, Factory Pro emulsion tubes, stock 5CFZ4 needle on clip 2, 22mm floats, mixture screws temp tuned
Bridgestone BT-016s 110/170


Image
User avatar
tommyj27
Level 9.5
Level 9.5
Posts: 970
Joined: Wed May 07, 2008 10:59 am
Location: Minneapolis, MN

Re: Another helmet thread.

Post by tommyj27 »

mszilves wrote:I think it all comes down to personal fit. I have 2 Scorpion EXO-700s, and absolutely love them! You get tons of features for the money, and in my opinion, one of the best values on the market.
+1 the gf and I both have EXO-700s and love them.
User avatar
TomGun
Level 2.5
Level 2.5
Posts: 271
Joined: Tue May 13, 2008 2:24 pm
Location: New Hampshire
Contact:

Re: Another helmet thread.

Post by TomGun »

IMHO I have 2 HJC CL-14. These are DOT and SNELL approved helmets. I find they vent nice, and they're not too noisy, and very comfortable. These retail around $150.00, but I just got a new one off Ebay for $100.
Good luck finding your helmet, I know its a PITA.
Looking for a FZR 400 3TJ
1992 FZR 600 SOLD :-(
2001 Ducati ST4 916
Chipped, with Fast By Ferracci cans
The Yellow Duc Project

Image

The lord tells me he can get me outta this mess but he tells me he's pretty sure your f***ed.
User avatar
cad600
1000+ Posts
1000+ Posts
Posts: 1413
Joined: Fri May 09, 2008 3:41 pm
Location: Atlanta, GA

Re: Another helmet thread.

Post by cad600 »

The Scorpion is great. It was my first helmet and by far the one that did the best job of not fogging up. It can be a little warm at times, but it is also very quiet.

Had a Icon Mainframe (see aviator). Saved my live and I loved the graphics. Horrible for fogging and very noisy to me. Ventalation was only slightly better than the Scorpion.

Got the KBC VR-2 GunDuo now. Very snug fit. Not very good at keeping the fog away. Decent ventalation. A lot quieter than the Icon was.

A good place to check out ratings on helmets is http://www.helmetharbor.com They test everything they sell and give you user rating. But they doin't carry all of the manufacturers. I jsut bought an anti-fog helmet insert from them and was very pleased at the shipping time. What ever you do, go to a store or stealership and try one different helmets. Everyones head is different and one that fits well for me may not fit right for you.
Yes, that is a Single Sided Swingarm FZR600 that I built.

Something is lurking, waiting, wanting to be built......It calls to me from the darkness....

I can finally see the light at the end of the tunnel....Then I realize that it is the train coming to run my ass over....
User avatar
Luke-a-Tron
Level 2.0
Level 2.0
Posts: 203
Joined: Mon Jul 14, 2008 3:27 pm
Location: Pittsburgh, PA

Re: Another helmet thread.

Post by Luke-a-Tron »

I've got the EXO-700 as well and I'm super happy with it. It's pretty quiet and has zero lift, even when I turn my head at high speed. My HJC (forget which model, CS-12 maybe) would try and rip my head off my neck whenever I looked to the side at speed. It was also crazy loud in comparison.

One thing I really like about the Scorpion is that you can change the visors without taking off the helmet. It takes some practice but it's very easy to do, even with gloves on, once you figure out the right angle to pop it on. You get the features of helmets that are roughly twice it's price. My helmet has a matte blue finish and I got a blue chrome visor. It looks totally pimp. I've gotten a number of comments from random people in cars.
Dr Rockso
Level 1.5
Level 1.5
Posts: 165
Joined: Sat May 10, 2008 10:15 am
Location: Fairfax , VA
Contact:

Re: Another helmet thread.

Post by Dr Rockso »

i wear the same $35 (closeout at dennis kirk) red m2r full face that i've been wearing for years . it's comfortable , but it could use a little more ventilation .
Image
Got busted plastics ??? go here : viewtopic.php?f=8&t=209
User avatar
YAM93
1000+ Posts
1000+ Posts
Posts: 1019
Joined: Sat May 17, 2008 8:19 pm
Location: Maryland, USA

Re: Another helmet thread.

Post by YAM93 »

Arizona- Hot -

latest Bell helmets ROCK with VENTING. I got a new MOTO-8 recently, vents more air than any other helmet, so my guess is the Bell Apex's are similar.

My Scorpion vents ok, but I live in Maryland, so, venting is not as important.

For real street venting I doubt you'll do better than SUOMY or SHARK. Try to spend more money if you can, the mid-line SHARK is like $280 (retail) and you won't be pissed and buying another helmet in 2 years.

I plan on getting a Shark as soon as money makes itself available (read: Wife let's me)
banghead
The Shark's are also the LIGHTEST you can get without killing your bank account with an Arai or Shoei.
Image
" several meat-eaters lay in vomit, too weak to move..."
User avatar
95FZR600
2000+ Posts
2000+ Posts
Posts: 2972
Joined: Sat May 31, 2008 10:41 pm
Location: Kennesaw, Georgia

Re: Another helmet thread.

Post by 95FZR600 »

For that kind of money I would go with the scorpion exo series. If you have more to spend I would go with the Arai.
2002 Yamaha R6-----2003 Yamaha R6

Image
User avatar
bucket
100+ Posts
100+ Posts
Posts: 108
Joined: Mon Jun 09, 2008 10:38 am
Location: Chandler AZ and its HOT!!!

Re: Another helmet thread.

Post by bucket »

Helmet Harbor is a local store for me! :banana: That’s who turned me onto the bell and exo!

I was looking around the local stores. And end up at cycle gear. They have a AGV XR2 on a return. Only $266!! :yikes: ( still trying to talk the wife in to it) I’m going to wait tell next week and see if they still have it. If not then I’ll keep looking

keep all opinions coming!
User avatar
95FZR600
2000+ Posts
2000+ Posts
Posts: 2972
Joined: Sat May 31, 2008 10:41 pm
Location: Kennesaw, Georgia

Re: Another helmet thread.

Post by 95FZR600 »

Yes, we have cycle gear here and they have everything. I love that store.
2002 Yamaha R6-----2003 Yamaha R6

Image
User avatar
cad600
1000+ Posts
1000+ Posts
Posts: 1413
Joined: Fri May 09, 2008 3:41 pm
Location: Atlanta, GA

Re: Another helmet thread.

Post by cad600 »

The switch from my Scorpion to the Icon was easy for me. I gained a little weight when I quit smoking. Helmet didn't fit any more so new helmet it was.
Yes, that is a Single Sided Swingarm FZR600 that I built.

Something is lurking, waiting, wanting to be built......It calls to me from the darkness....

I can finally see the light at the end of the tunnel....Then I realize that it is the train coming to run my ass over....
Post Reply