FZRSupport: the FZROnline Archive

Posted: **Sun Jul 20, 2008 1:51 pm**

Where is it? I'm up in Ruidoso, NM on vacation with the fam, and I'm idling at about 700

, down from 1100.

Posted: **Sun Jul 20, 2008 2:28 pm**

one of the frame plugs should get you access to a big phillips headed dial you can turn to adjust idle

Posted: **Sun Jul 20, 2008 2:31 pm**

gratzi my friend.

Posted: **Sun Jul 20, 2008 2:57 pm**

ok, I checked it out and took all the frame plugs off, but couldn't find a phillips head dial. Where exactly is it located?

Posted: **Sun Jul 20, 2008 3:21 pm**

Its the knob supported by the bracket at the bottom left side of the picture

(picture courtesy of ragedigital

)

Posted: **Sun Jul 20, 2008 5:34 pm**

thats the one

it might not be located there on the 600....let me go look!

Posted: **Sun Jul 20, 2008 5:40 pm**

aight.

so that sits under where the choke is mounted to the frame

with sidecovers it'll be annoying to get to

Posted: **Sun Jul 20, 2008 10:58 pm**

alright, I found it. Thanks again!

Posted: **Mon Jul 21, 2008 8:15 am**

megaloxana wrote:(picture courtesy of ragedigital )

I need to replace that photo with one that doesn't have a bunch of the float bowl cover screws misssing...

Also, that tubing on the right side is from an EXUP equipped bike. They have since been removed.

Posted: **Mon Jul 21, 2008 9:58 am**

ragedigital wrote:I need to replace that photo with one that doesn't have a bunch of the float bowl cover screws misssing...

You trying to save weight there Darrin?

Posted: **Mon Jul 21, 2008 10:05 am**

ian wrote:alright, I found it. Thanks again!

no problem.

idle adjust