Help Identifying Unused Wiring Connector

[Clanky]

Checking over my bike today and found an unused wiring connector near the VR. I suspect it may be for an old alarm system as the tail has a very small red light fitted to it, although the light is no longer connected to anything.

The bike electrics seem fine so I don't think that this connector was for an essential part.

Any ideas?

[Stranglerman]

That does look like an alarm connection. My son and I have just about rewired his 600 and we had nothing like that to start with. Just one question What's the relay cabletied to the frame next to the main relay?????

[Clanky]

Stranglerman,

I think it's the turn signal/flasher relay (It appears to be an after market part by Halfords). I'll probably replace it with a better pattern part when I get round to doing the VR mod.

I only got this bike in July and it's my first FZR so I am still getting to know it.

[DonTZ125]

The relay on the frame is a parts-store flasher relay; the 6-pin connector hanging free (with only 3 wires going to it) is the OEM connector. The Black, White/Green and Yellow/Red wires are for the self-cancelling circuit in the Yamaha relay.

[Clanky]

Thanks Don,

Found this link to another image showing the VR using the original connector.

http://www.fzrarchives.com/ipb/lofivers ... 37866.html

If i get the correct relay I can just re-wire it as it was originally as all the wires are still there. I appreciate all the replies.