FZRSupport: the FZROnline Archive

do 94 yzf led turn signals for the front. are they just plug and go

Sure. Just make sure you're using the correct wires. One will give significantly brighter than the other. I can't remember which is which offhand.

Blue is running light, Black is ground; Green or Brown ("Chocolate") is the signal for that side.

What would we do without you, Don?

thanks everyone but don what do i do if the led lights are only a two wire

Ignore the blue (running light) wire. Hook up the hot bike wire to the hot LED light wire, and ground to ground.

blensen - You'd get by, just not as well ...

DonTZ125 wrote:Ignore the blue (running light) wire. Hook up the hot bike wire to the hot LED light wire, and ground to ground.

blensen - You'd get by, just not as well ...

thanks i didnt know if it would be that easy or if i had to do resistors and what not

Depends on the arrangement. Some LEDs have built-in ballast resistors; some need to be added to slow the blink rate. The other option is to splice in a flasher relay meant for LEDs, but you'll lose the self-cancelling function of the OEM system.

ok fzr 600 has 3 wire the lights have two is there a way i can still make it with running lights too or am i just stuck with turn signals only

The other option is to splice in a flasher relay meant for LEDs.








_____________________________
fluorescent led bulbs
led ceiling lights
led strip lighting