Page 1 of 1
exhaust
Posted: Wed Jul 27, 2011 9:53 pm
by floridafzr600
hey where do i find a cheap slip on for my 91 fzr 600 i cant find anything
Re: exhaust
Posted: Thu Jul 28, 2011 5:34 pm
by Crying Freeman
Delkevic makes slip-ons for the FZR600...
http://www.delkevic.us/?section=home
I bought the 18 inch stainless steel oval for $164 shippped and was a perfect fit.
Here is the ebay listing:
http://cgi.ebay.com/ebaymotors/ws/eBayI ... &viewitem=
Re: exhaust
Posted: Thu Jul 28, 2011 6:33 pm
by floridafzr600
Re: exhaust
Posted: Thu Jul 28, 2011 7:15 pm
by Crying Freeman
Btw...you will need cut and expand the pipe that slips into the stock header pipe. I'll post pics of the installed exhaust this weekend.
Re: exhaust
Posted: Thu Jul 28, 2011 7:35 pm
by floridafzr600
ok thanks for the heads up
Re: exhaust
Posted: Thu Jul 28, 2011 8:05 pm
by Crying Freeman
The exhaust are universal so I'm sure you can buy the one I have based on the ebay link. They have a number you can call at 866-318-3065 for questions. Their service is very good.
Re: exhaust
Posted: Thu Jul 28, 2011 10:23 pm
by floridafzr600
alright thanks
Re: exhaust
Posted: Fri Jul 29, 2011 8:46 am
by Crying Freeman
Here is a pic of my FZR with the Delkevic exhaust:
The pipe that slips into the stock pipe needs to be shorted and expanded. You can get it expanded at your local muffler shop (usually for free or a $5 tip).
There is no rejetting required. The exhaust makes a nice improvement to the bikes appearance and performance.
Re: exhaust
Posted: Sun Jul 31, 2011 8:46 pm
by CrazySkullCrusher
I run twin 14" delkevics on my xj600 seca 2. They make a nice muffler, looks and sounds great.
