Page 1 of 1
Brake caliper adapters
Posted: Mon May 09, 2011 5:42 pm
by olie05
Is anyone making (and selling) brake caliper adapters to fit the later FZR600 calipers (100mm bolt spacing?) to fit 320mm front rotors?
I'm interested in doing this when I get new rotors. The way I see it, what's the point of keeping the stock size ones when the larger ones cost about the same?
Re: Brake caliper adapters
Posted: Tue May 10, 2011 4:18 am
by taggy
100mm is the same as the yamaha blue spot calipers isn't it? i know they fit the fzr 400 without any mods. not sure on 600 though as the disk are a bit smaller on 400 i think,
Re: Brake caliper adapters
Posted: Tue May 10, 2011 10:39 am
by cad600
He's not talking about the caliper fitting the bike. He's going to a larger diameter rotor which means he needs to move the mounting of the caliper itself.
No one makes anything for the FZR. You would need to design it yourself.
Re: Brake caliper adapters
Posted: Tue May 10, 2011 11:03 am
by olie05
ok... I guess I'll have to make some. I'll probably make some extra to lower the machining cost.
Re: Brake caliper adapters
Posted: Wed May 11, 2011 3:22 am
by taggy
told you didn't know about the 600!
