Page 1 of 6

1000 EXUP SWINGARM TO FZR 600 updated bolt sraight on

Posted: Tue Nov 16, 2010 1:36 pm
by tony
Image

hi guys im back after house move got meself a exup swingarm to go on the fzr told it will bolt straight on is this correct i have now started to put exup 1000 swingarm onto my fzr600 it bolted staight in the chain alignement is bang on the standard shock straight on brake calliper straight on dog bones straight on now the negatives i will have to put spacers behind both rearsets more pics will follow

Image
Image
Image
Image
Image
Image
Image
Image
Image

Re: EXUP SWINGARM TO FZR 600

Posted: Tue Nov 16, 2010 2:21 pm
by Target30
do you have any pics?

Re: EXUP SWINGARM TO FZR 600

Posted: Tue Nov 16, 2010 2:34 pm
by tony
ill have some for the weekend the pivot measures 220 its alimminium 17" rim with 190 tyre including spacers and bolts

Re: EXUP SWINGARM TO FZR 600

Posted: Tue Nov 16, 2010 2:54 pm
by yamaha_george
tony wrote:ill have some for the weekend the pivot measures 220 its alimminium 17" rim with 190 tyre including spacers and bolts
The '92FZR 600 UK model has a 220 mm pivot width for sure and the 3 other model FZR swing arms I have used for it were straight bolt ins HOWEVER there are other GOTCHA's you need to be aware of take a look at my web site under FZR project for details
HTH

Re: EXUP SWINGARM TO FZR 600

Posted: Tue Nov 16, 2010 8:58 pm
by thatkid
Nice to cya back Tony, hope the move wasn't too stressful. Like Target said
:nopic

Lets know how the swap goes.

Mal.

Re: 1000 EXUP SWINGARM TO FZR 600 updated bolt sraight on

Posted: Sat Nov 20, 2010 12:57 am
by tony
Image

Re: 1000 EXUP SWINGARM TO FZR 600 updated bolt sraight on

Posted: Sat Nov 20, 2010 12:58 am
by tony
Image

Re: 1000 EXUP SWINGARM TO FZR 600 updated bolt sraight on

Posted: Sat Nov 20, 2010 1:16 am
by apsolus
you just started a revolution my friend. a 190 on an fzr 600, bravo good job :notworthy:

Re: 1000 EXUP SWINGARM TO FZR 600 updated bolt sraight on

Posted: Sat Nov 20, 2010 1:33 am
by trifgeorge
let us know how it goes on the road

Re: 1000 EXUP SWINGARM TO FZR 600 updated bolt sraight on

Posted: Sat Nov 20, 2010 9:31 pm
by blensen
Incredible. I can't believe nobody has documented this swap before. Next time I need a new tire I'm doing this swap.

Re: 1000 EXUP SWINGARM TO FZR 600 updated bolt sraight on

Posted: Sun Nov 21, 2010 1:39 am
by apsolus
and so it begins... :headbang:

Re: 1000 EXUP SWINGARM TO FZR 600 updated bolt sraight on

Posted: Sun Nov 21, 2010 1:41 am
by blensen
With a local racing club not too far from where I live 180 or 190 race take-offs are cheaper than dirt. The swingarm should pay for itself after just a season or two. Good work!

Re: 1000 EXUP SWINGARM TO FZR 600 updated bolt sraight on

Posted: Sun Nov 21, 2010 2:10 pm
by ragedigital
blensen wrote:180 or 190 race take-offs are cheaper than dirt
A 120 front and 180 rear are usually sold in combos as well that are cheap. I bought my last set of new Michelin Power Race for the GSXR for $199 shipped.

Re: 1000 EXUP SWINGARM TO FZR 600 updated bolt sraight on

Posted: Sun Nov 21, 2010 4:24 pm
by tony
yes cheers rage ive also been looking online and you can get two rear and one front scrubbed tyres for £95 also looking on ebay swingarms £35 its got to be a cheaper and better option than the r6 swinger swap

Re: 1000 EXUP SWINGARM TO FZR 600 updated bolt sraight on

Posted: Mon Nov 22, 2010 4:40 am
by yamaha_george
tony wrote:yes cheers rage ive also been looking online and you can get two rear and one front scrubbed tyres for £95 also looking on ebay swingarms £35 its got to be a cheaper and better option than the r6 swinger swap
Currently there are 4 exup 1K swing arms on ebay Uk from 19 -> 44 UKP none of them are listed with anything else so you need axles & Pivot bolts, axle adjuster plates so you need to ask the sellers for the extra's and see the price.