Page 1 of 1
need good pics of 93 wiring harness
Posted: Thu Apr 01, 2010 9:23 pm
by burns556
well im sure to get flak for this but here it goes anyways i took the whole engine harness out and forgot to take pics before i took it out yup i know i know i told ya so i know i should have taking some pics before i took it out does any one have some good pics of how it routes thru and around the frame to the cdi box thanks in advance
Re: need good pics of 93 wiring harness
Posted: Fri Apr 02, 2010 2:46 am
by yamaha_george
burns556 wrote:well im sure to get flak for this but here it goes anyways i took the whole engine harness out and forgot to take pics before i took it out yup i know i know i told ya so i know i should have taking some pics before i took it out does any one have some good pics of how it routes thru and around the frame to the cdi box thanks in advance
Burns.
Oh boy with a world full of camera phones...........................................<BG> I have to grin because it is a mistake I make all too often & I am glad to have some company.
The official wiring & cable routing layout is published in the Yamaha Service manual so we need to ask the guys here for a scan of that ,
I have the manual for the FZR 500 (YES that is not a TYPO guys there was an FZR500 in 89) but not the six and the cable wiring layout runs to 7 pages
If you are truly stuck ie no one here has one, PM me and I will scan the 500 and you will have to think it thro from those OK
Re: need good pics of 93 wiring harness
Posted: Sat Apr 03, 2010 2:25 pm
by burns556
thanx george