FZRSupport: the FZROnline Archive

I need 2 dimensions, top and bottom, from inside of side fairing from left to right, if you were to draw a line accross the top and bottom of the radiator. thanks

Did you hear that it was a PIN dropping.......... I guess I will have to through my sides on and get the dimension myself.

The sides are off of mine right now and I hadn't checked FZROnline since 3pm yesterday (no internet at home).

If you do get the dimension, could you let me know or post it? I'm gonna be mounting my ZX7 radiator next week and it would be helpful.

the_finch wrote:The sides are off of mine right now and I hadn't checked FZROnline since 3pm yesterday (no internet at home).

If you do get the dimension, could you let me know or post it? I'm gonna be mounting my ZX7 radiator next week and it would be helpful.

NP.

I'm getting 17 1/2 @ the top and 18 1/4 @ the bottom of the radiator.

I measured from right to left though, instead of left to right, as you suggested. Oooops

Genesis wrote:Did you hear that it was a PIN dropping.......... I guess I will have to through my sides on and get the dimension myself.

Sorry that you have been left cold on this but a lot of guys (me included) only run the headlamp fairing OR some other VERY modern fairing and in a few cases no fairings as in street fightered.

One thing I have noticed is that for measurement requests get better results Fridays 'spose it is because we are home and no work the day after so we kick back check the forum, hey no biggie I can do that.

SerendipitousG wrote:I'm getting 17 1/2 @ the top and 18 1/4 @ the bottom of the radiator.

I measured from right to left though, instead of left to right, as you suggested. Oooops

thats great , could it get it frpm left to right though

yamaha_george wrote:

Genesis wrote:Did you hear that it was a PIN dropping.......... I guess I will have to through my sides on and get the dimension myself.

Sorry that you have been left cold on this but a lot of guys (me included) only run the headlamp fairing OR some other VERY modern fairing and in a few cases no fairings as in street fightered.

One thing I have noticed is that for measurement requests get better results Fridays 'spose it is because we are home and no work the day after so we kick back check the forum, hey no biggie I can do that.

thanks YG

Genesis wrote:

SerendipitousG wrote:I'm getting 17 1/2 @ the top and 18 1/4 @ the bottom of the radiator.

I measured from right to left though, instead of left to right, as you suggested. Oooops

thats great , could it get it frpm left to right though

Whoa! I went back out and measured it left to right and turns out it's WAY bigger. I'll post the measurements in a minute -

Genesis wrote:

yamaha_george wrote:

Genesis wrote:Did you hear that it was a PIN dropping.......... I guess I will have to through my sides on and get the dimension myself.

Sorry that you have been left cold on this but a lot of guys (me included) only run the headlamp fairing OR some other VERY modern fairing and in a few cases no fairings as in street fightered.

One thing I have noticed is that for measurement requests get better results Fridays 'spose it is because we are home and no work the day after so we kick back check the forum, hey no biggie I can do that.

thanks YG

Genesis,
You're welcome Lets hope I can do better next time