FZRSupport: the FZROnline Archive

What is the stock main jet in FZR600 mikuni carbs??? I wanna say 102.5, but not sure. Tried to WIKI it... thanks

shit i think i just found it... is it 107.5???

tampaFZR600 wrote:shit i think i just found it... is it 107.5???

yes

and are the main jets the small round jets or large round jets?? I think I'm going to get 115's...

tampaFZR600 wrote:and are the main jets the small round jets or large round jets?? I think I'm going to get 115's...

Those pics are really coming in handy...

ragedigital wrote:Those pics are really coming in handy...

Yeah, I added to that pic to point out to Shred in a PM, which was the pilot and which was the 'starter' jet.

reelrazor wrote:

ragedigital wrote:Those pics are really coming in handy...

Yeah, I added to that pic to point out to Shred in a PM, which was the pilot and which was the 'starter' jet.

yup

thanks fellas

ok.....this is what i mean, look at all the different sizes in main jets.... The ones we use obviously are the flat head ones not the hex ones, but there are 3 different kinds....

http://www.motorcyclecarbs.com/Mikuni_M ... 3e656f132c

never mind! http://www.jetsrus.com/a_jet_kit_street ... fornia.htm

also what is the difference in OEM and Genuine jets????

That's "OEM style", not OEM. OEM (Original Equipment Manufacturer) would be the same as Genuine.

DynoJet sells them individually as well or you can buy them in kits. They are numbered differently, but accomplish the same thing.

"The Dynojet main jet hole size is measured in millimeters. For example, a DJ142 has a 1.42mm hole." - according to DynoJet

darrin