Page 1 of 1
shifter bolt and nut
Posted: Wed May 06, 2009 8:32 pm
by Mutmatt
Bike took a little tumble but for the most part it was a ok and no one was hurt. Does anyone know what the bolt on the shifter is or what it looks like. Better yet is it a universal part that i can get at home depot or the like?
any advice is appreciated
Re: shifter bolt and nut
Posted: Wed May 06, 2009 8:34 pm
by ragedigital
I am assuming you mean the bolt that hold the foot shifter to the shift spline?
If so, you can get that at Home Depot. Mine fell out while riding one time - on my way to Home Depot of all places. I had to ride my bike in 4th gear all the way there... not the best take off from a stand still I'll tell you that.
Re: shifter bolt and nut
Posted: Thu May 07, 2009 10:35 am
by Mutmatt
exactly the bolt. What is the size of the bolt and nut... any idea?
Re: shifter bolt and nut
Posted: Thu May 07, 2009 10:47 am
by ragedigital
Not exactly sure... 5x20mm? That's a guess.
Mine didn't have a nut. It should have threads built in when you put the screw through (#11 in the attached graphic)
Re: shifter bolt and nut
Posted: Thu May 07, 2009 10:52 am
by Mutmatt
wonderful i will go pick one up! Thanks a ton!
Re: shifter bolt and nut
Posted: Thu May 07, 2009 12:48 pm
by Mutmatt
for future reference in the picture bolt 11 is m6X20mm
! thanks for getting me a rough estimate to start from!