FZRSupport: the FZROnline Archive

Recently stripped the frame to paint and im feeding all wiring through the subframe again. I came across this part of the wiring harness and it appeared to only attach to the positive and grounds of the battery. It's rather hacked up. Anyway does anyone recall where this thing is supposed to be plugged into?

I wanna say main relay...

wow, that is all hacked up. best of luck. it does look like main relay. make sure by looking on the wiring diagram.

ex-up?
that fuse is aftermarket..

i take pics off what my stuff looks like and where it goes before I remove stuff then I have something to look at when putting it back together.

that black fuse holder looks like one of two things.

a. the wire for the horn
b. part of the ignition system (in front of the VR, behind the left tail fairing when sitting on the bike)

my

demon_knight69 wrote:that black fuse holder looks like one of two things.

a. the wire for the horn
b. part of the ignition system (in front of the VR, behind the left tail fairing when sitting on the bike)

my

you mean the CDI/TCI?
the white plug might be what plugs into your cdi box, but it would be connected to the main harness and all

Well whatever it went to, it's not going back. It doesn't plug into anything that is currently on my bike.

It looks like a hacked in power supply for an accessory to me. That IS an aftermarket inline fuse holder. Looks like they found a keyed 'on' hot wire and gaacked it in there.

reelrazor wrote:It looks like a hacked in power supply for an accessory to me. That IS an aftermarket inline fuse holder. Looks like they found a keyed 'on' hot wire and gaacked it in there.

Razor's right. Looks like a hacked wiring harness for a car stereo now that I look at it again.

ahh yes...previous fzr owners never fail to amaze me

well keep it handy because that white plug looks like the male connector im going to need once I get my r1 headlight harness
see female plug vvvv not sure though, wont know till i get it.