Page 1 of 1
R6 link pipe on 1994fzr
Posted: Sun Jan 25, 2009 3:46 pm
by lloydspencer
There are many exhausts for the r6. I was wonderin whether a link pipe is availabe that fits the fzr but then allows r6 end cans to be fitted?
Any help would be much appreciated.
Re: R6 link pipe on 1994fzr
Posted: Sun Jan 25, 2009 5:01 pm
by 95FZR600
Are you referring to the mid pipe? That my friend you have to have made or go to your local parts store and make your own and then have it welded.
Im not aware of one that will work with the r6 and fzr header if there is someone else will have to chime in. I cut mine coming off the stock header and then using it for the r6. I then welded it to work.
Re: R6 link pipe on 1994fzr
Posted: Sun Jan 25, 2009 5:06 pm
by thatkid
I sell modified R6 headers to work with the FZR motor. At that point you can buy a R6 exhaust and it will bolt right up with a little bit of modding. You will have to make your own exhaust bracket.
Re: R6 link pipe on 1994fzr
Posted: Mon Jan 26, 2009 2:22 pm
by lloydspencer
does anyone know somewhere in the uk to whom i could speak to and ask about makin a pipe?
Re: R6 link pipe on 1994fzr
Posted: Mon Jan 26, 2009 9:29 pm
by 95FZR600
thatkid wrote:I sell modified R6 headers to work with the FZR motor. At that point you can buy a R6 exhaust and it will bolt right up with a little bit of modding. You will have to make your own exhaust bracket.
Hey TK, does the fairing interfere at all when you install the modded r6 pipe? I could not remember.