FZRSupport: the FZROnline Archive

Anyone know where I can score a bracket to replace the passenger peg bar to hold the muffler? They used to be on ebay but I couldn't find any on there.

megaloxana wrote:Anyone know where I can score a bracket to replace the passenger peg bar to hold the muffler? They used to be on ebay but I couldn't find any on there.

Hi M,
if they are not on fleabay try your on-line bike stores these stays are now a fashion accessory for bikes.

http://cgi.ebay.com/ebaymotors/_Motorcy ... 0223948480&

thats the same one i purchased on ebay also works great but after 4 yrs im thinkin about changing to a diff one

Deputy1042- Thanks for the link. Must of missed that in my search.
PIMPMYFZR- what were you thinking of switching to? How did the ebay one hold up?
yamaha george- are they actually fzr600 specific or do you know of any other bikes that interchange? i checked bikebandit and they didn't have any fzr ones, but tons for other bikes.

i would suppose that there are some out there that would prob bolt up to the fzr from another bike i guess its just whose done it and with what ? dunno if youll find that info here though . i seen one where it looked like two wires connecting where it meets the pipe looked pretty trick .

PIMPMYFZR wrote:i would suppose that there are some out there that would prob bolt up to the fzr from another bike i guess its just whose done it and with what ? dunno if youll find that info here though . i seen one where it looked like two wires connecting where it meets the pipe looked pretty trick .

You mean like this one?

that doesn't look that hard to build. your mainly just welding some tubing into a V and using washers where the the bolts go to mount up. but the ebay one looks a lot better imo.

off topic, thats the airtech fairings on that bike right?

megaloxana wrote: Anyone know where I can find a bracket to replace the passenger peg bar to hold the muffler ?

I also want to find one for my bike !

.... Any one know were ?


.

manveru wrote: off topic, thats the airtech fairings on that bike right?

yes

http://www.kneedraggers.com/list/1318/m ... zuki/SV650 Maybe you can bend it to fit? Seems like a lot of money for taking a chance it won't fit.

This is all I could find, unless PIMPMYFZR can tell you where he got his from. I couldn't find any similar items either. I thought the old CBR600F2 used to come with this, so if you could find anyone parting one out on maybe the WERA 13x forum perhaps, although this is very unlikely, because that is an OLD bike.

It might almost be easier to go down to Home Depot and get a piece of aluminum you can cut down, grind, and bend to get what you're looking for. I suppose you could try to call Vance & Hines to see if they have anything, depending on what kind of exhaust you have.

I looked in the Dennis Kirk catalog and couldn't find anything. It doesn't hurt to stop by your local bike shop and try also, they usually have suppliers like Tucker Rocky that may have oddball parts like that. If you find one let us know, it's something that can be put in the WIKI under "exhaust".

i could use a new one or to polish mine up... Looking kinda old

old_school wrote:i could use a new one or to polish mine up... Looking kinda old

Did you originally get yours from ebay too? It probably wouldn't be that hard to polish it.

i think somone posted this earlier but http://cgi.ebay.com/fzr-600-race-exhaus ... dZViewItem
this is the one i bought cant remember if i paid this much for it but your exhaust will boolt right up tothis and Yes u can polish the shit out of it and make her shine like crazy , but in a week you will have to polish it again . I dont mess wit it anymore personally LOL2 after a while u get sick of tryin to make it shine when it allready is .
Now , somthing like this you could probably get cheap and bend it out alil bit to make work ive been thinkin about one of these
http://cgi.ebay.com/1999-YAMAHA-YZF-R6- ... dZViewItem

but its your money and your preference so whatever tickles your fancy Go For It lolol

PIMPMYFZR wrote: http://cgi.ebay.com/1999-YAMAHA-YZF-R6- ... dZViewItem

but its your money and your preference so whatever tickles your fancy Go For It lolol

I really like that style more compared to the aluminum bracket style. And really that would be pretty easy and cheap to produce.